Passenger airbag cover

dizzy · Post by **dizzy** » Sat Nov 17, 2007 9:38 pm

Im not sure, but mine is doing the same

Deano · Post by **Deano** » Sat Nov 17, 2007 9:49 pm

Yes mine is the seem to and it is letting the inside down badly

Post by **teamster1975** » Sat Nov 24, 2007 5:34 pm

Yes, same here

I figured removing the module & using contact adhesive, then clamping the edges 'til it goes off, but I've yet to decide if I'm that bothered! Probably will end up doing it though

jameslxdt · Post by **jameslxdt** » Sat Nov 24, 2007 6:31 pm

you can buy the cover seperatley from pug

Deano · Post by **Deano** » Sat Nov 24, 2007 9:26 pm

jameslxdt wrote:you can buy the cover seperatley from pug

Do you no the price and part number for a black one ?

mjb · Post by **mjb** » Sun Nov 25, 2007 2:01 pm

jameslxdt wrote:you can buy the cover seperatley from pug

You sure? I can't find it on servicebox...

MJBD8 · Post by **MJBD8** » Sun Dec 02, 2007 11:35 am

I feel your pain. I went to Dutton foreshaw in Newport South Wales and was quoted £75 for a new panel. The reason I'm holding off is the thought of how long will it last once installed....

jameslxdt · Post by **jameslxdt** » Sun Dec 02, 2007 7:28 pm

mjb wrote:
jameslxdt wrote:you can buy the cover seperatley from pug
You sure? I can't find it on servicebox...

thats because service box is crap

i cant look up any radio's or HDi fuel system parts using my VIN yet on the old system LASER (ver.1) it works fine
i thought you had a copy of LASER?

thomashb · Post by **thomashb** » Fri Jan 04, 2008 1:28 am

Mine has raised on one side and the visible area is about 1inch long. The frustrating thing is that this is barely enough room to work with and to get a decent spread of glue into but I don't want to make it worse in order to facilitate a bodge reglueing job. On top of this is the fact that the cover itself is very stiff so its hard to make it stay down to begin with and the metal frame it is stuck to is a very smooth cast metal (similar to the sort of metal inside computer cases, or the stereo removal keys) so glue doesn't really stick to it in the first place.

thomashb · Post by **thomashb** » Fri Jan 04, 2008 2:17 am

Where does one get a copy of LASER? Service Box works well enough but is a bit clunky and isn't as comprehensive as it perhaps should be.

MJBD8 · Post by **MJBD8** » Mon Jan 14, 2008 5:50 pm

mjb wrote:
jameslxdt wrote:you can buy the cover seperatley from pug
You sure? I can't find it on servicebox...

Service box: 00008214EK £73.92 Inc Vat

forget looking at airbags it's in "Covers" or "Dashboards"

Post by **teamster1975** » Mon Jan 14, 2008 10:16 pm

MJBD8 wrote:Service box: 00008214EK £73.92 Inc Vat

I still reckon contact adhesive would do the job! Sod paying £74!

MJBD8 · Post by **MJBD8** » Tue Jan 15, 2008 9:05 pm

teamster1975 wrote:
MJBD8 wrote:Service box: 00008214EK £73.92 Inc Vat

I still reckon contact adhesive would do the job! Sod paying £74!

I'd like an ink stamp that spells a funny word so when the thing deploys it'll be printed on the passengers head.

mjb · Post by **mjb** » Tue Jan 15, 2008 9:22 pm

MJBD8 wrote:I'd like an ink stamp that spells a funny word so when the thing deploys it'll be printed on the passengers head.

I like your thinking!

Post by **teamster1975** » Wed Jan 16, 2008 10:41 am

mjb wrote:
MJBD8 wrote:I'd like an ink stamp that spells a funny word so when the thing deploys it'll be printed on the passengers head.
I like your thinking!

Something like "Duck!" would be appropriate

406oc.co.uk

Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover

Re: Passenger airbag cover