long shot 1.6 hdi 207/307 110bhp pinouts

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

User avatar
Doggy
Mod with a 2.2 HDi, De-Fapped!
Posts: 10710
Joined: Mon Oct 13, 2008 11:49 pm
Location: Northants

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by Doggy »

adaptorman wrote:ps found some decent software to read,write to the ecu :)
Interesting - what software & where to find it? Do tell.....
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
adaptorman
1.8 8v
Posts: 27
Joined: Sat Apr 02, 2011 10:47 am

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by adaptorman »

that would be telling lol, i removed my 207 dpf ,choped both ends removed insides and re tig welded it back up , to find no real differnce in power (maybe a bit but nothing to shout about tbh) im getting a few faults from ecu and esp and esp stateing a fault ,ive recoded the oringal ecu file , yet esp light is still on , im sure my esp isnt buggard or faulty , as im sure its a possible codeing or contecting issiuse as it worked fine before battery touched ecu earthing,
on a good note dpf works a treat,no faults or going into lim mode ,as one company wanted 400pounds,,ochh ,soon as i sort this i will do a diy remap, as engines dead till it hits 2500rpm but dies again after around 3400rpm poor for a 110 engine
adaptorman
1.8 8v
Posts: 27
Joined: Sat Apr 02, 2011 10:47 am

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by adaptorman »

any idea what these codes mean and were the parts are located
207 1.6hdi 56plate what and were are these faults
permant fault/cooling pressure signal,short curcit to earth
other one says abs/esp ecu peranent fault /regulation of engine torque?
any infomation on these ,and were there located on a dv6 16v hdi engine
leehdi
2.0 16v
Posts: 117
Joined: Wed Oct 15, 2008 10:45 pm
Location: Sheffield
Contact:

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by leehdi »

Do they return straight away when you clear them?

If you go on live data, does it monitor the wheel speeds and things ok?
adaptorman
1.8 8v
Posts: 27
Joined: Sat Apr 02, 2011 10:47 am

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by adaptorman »

hiya lee soon as i clear them they return ,
leehdi
2.0 16v
Posts: 117
Joined: Wed Oct 15, 2008 10:45 pm
Location: Sheffield
Contact:

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by leehdi »

Not sure on the second one

But the first will be the temp sensor for the AC
adaptorman
1.8 8v
Posts: 27
Joined: Sat Apr 02, 2011 10:47 am

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by adaptorman »

right ill go buy one may save a fault, ps were is the eletrovalve for the boost on these as im told theres 2 soilionds but i lose the vacume pipe behind engine lee ,bloody horrie cars these lol
adaptorman
1.8 8v
Posts: 27
Joined: Sat Apr 02, 2011 10:47 am

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by adaptorman »

just phoned dealers this morning they state a ecu from a 307 to a 207 will have differnert codeing,,ie 307 may just have abs were 207 has esp and abs etc , evern thow both ecus have identical numbers :( chuffing unreal , he said unless u can either recode the ecu or select abs only /but im unsure if this is done by puegoet planet or by recodeing ecu software?any ideas
anyone
leehdi
2.0 16v
Posts: 117
Joined: Wed Oct 15, 2008 10:45 pm
Location: Sheffield
Contact:

Re: long shot 1.6 hdi 207/307 110bhp pinouts

Post by leehdi »

Why not just get a 207 one and recode the immo?
Post Reply