my blower just gave up !
checked fuse layout in owners manual - only found 2 possibles - F2 in pass comp.- 5 amp
& number 18 in engine comp. a 40 amp - neither are blown - checking in Haynes, am I looking at replacing blower motor / blower motor control module or any other (pref. easier) things I've missed ?
blower
Moderator: Moderators
Re: blower
The blower control module can certainly fail in this manner. Have a search for "6441L2"
2002 V6 SE Coupé (210bhp) - (Aegean Blue)
2002 D9 2.2 HDi Exec Estate - Samarkand Blue
PM me for PP2000 diagnostics around Surrey
-
- 3.0 24v
- Posts: 3570
- Joined: Fri Apr 06, 2012 9:02 pm
- Location: Bournemouth
Re: blower
Quick check, with engine running and blower set to full speed, reach behind the passenger side carpet under the glovebox and look for some thick wires going into a green connector. Not easy to see as its tucked away a bit. Give these wires/connectors a wiggle and see if the fan comes to life.
If so then an eBay search for the above will get you a replacement for around £25, its held in by a 6mm bolt.
If no joy then there is a possibility you have a fault with the ignition barrel, which is less common but not unheard of.
If so then an eBay search for the above will get you a replacement for around £25, its held in by a 6mm bolt.
If no joy then there is a possibility you have a fault with the ignition barrel, which is less common but not unheard of.
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
Re: blower
Or it could be the motor very easy to remove & test, under left hand side can be easier to remove glove box just 2 white plastic pins.
Re: blower
if it's ignition barrel- does that mean new ECU ?
Re: blower
Usually poor or loose connections but have a play with the blower first.
I have a working D8 complete blower if you're near TF3 but won't fit a D9. Post your model in your SIG as it helps for future advice.
5 minute job to remove a blower motor on these so don't worry about it being a big job.
I have a working D8 complete blower if you're near TF3 but won't fit a D9. Post your model in your SIG as it helps for future advice.
5 minute job to remove a blower motor on these so don't worry about it being a big job.
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
2003 2.2 HDI SE
Re: blower
No. You can just replace the switch block on the back of it so you retain the use of your original keys.paul61 wrote:if it's ignition barrel- does that mean new ECU ?
2001 ES9J4S Coupe Manual Diablo