Window anti pinch feature information?

[Rob5464]

I have been looking for information but so far nothing has come up. I have bought some Heko wind deflectors, but the anti pinch feature is stopping the window from fully closing.

I tried disconnecting the battery to re-calibrate the window, but to no joy. Ideally I would just like to unplug the sensor or ECU. But I don't know where either of these are or what they look like.

[Welly]

I think it's part of the motor itself.

Try lubricating the window rubbers with silicone maintenance spray, see if that helps.

[lozz]

Press and hold up the ^ Button,until you hear it click,

ihad same problem with our 207. that's how isorted it,worth a try,

[grasmere59]

I tried the same wind deflectors on mine and it did the same although worse on the drivers side,i tried everything and gave up on the drivers side and slung it in a tizzy but the passenger side is still on the car

[Rob5464]

I have tried but it doesn't want to go up, I will try lubing the seals.

Failing that, if the mechanism is part of the motor I will see if the motor on my 306 fits.

I could try trim the rubber seal, so its not so tight on the glass. But if it doesn't work I will need to buy a new seal. As water will get in without the deflector.