[b]Help !!!!! my heater blower has stopped working[/b]

[wolfyhdi]

Can anyone tell me where to find the heater blower relay for my x reg 90hdi.Need to check to see if its faulty.Checked fuses and all seem ok thanks...................................

[steve_earwig]

Ah, another new victim, welcome. You and this guy too.

[powerslider]

Hi, i can't help i am affraid, having the same problem (see my posting).

If you sort it out please let me know what you did, i will do the same.

Its freezing in my car at the moment!!!!!!!!!!!!!!!!!!!!!

Cheers

Paul

[puggy]

had this prob on my Xreg 110 hdi , the climate control lit up but when you touched the buttons
you could not hear any of the flaps moving and the blower didn't work. I checked fuses etc everything
fine , eventually narrowed it down to ignition switch , when i slightly wiggled the key i heard the blower
kick in it turned out ignition switch was loose causing a break in current to wire going to blower etc,
tightened it up cable tied wire sheath to steering column all ok. One other thing the blower motor has
got a control module attatched to it might be worth checking that

[mjb]

One other thing the blower motor has got a control module attatched to it might be worth checking that

If it's like the D8s, the "control module" is just a couple of transistors/voltage regulators. something that pretty much ain't ever going to break. However the +ve power wire for the motor has its own recessed spade connector onto the board and on my dad's d8, this has burnt/corroded causing the blower to require kicking in order to work

Going to have to strip it down and possibly solder a new length of wire in, but it's pretty thick gauge wire not the usual tiny stuff I work with...

[wolfyhdi]

Thanks for that guys........................
Just wired fan up to work for now.
There is a box at the back of console it slides out (two geen blocks go into it) is this the problem?
Cos power is going into box but none coming out