Remote locking reset query

[Garry]

Howya all?

Have a 2001 406 HDi that the remote locking won't work on.

Battery is fine in the remote.

Tries the reset procedure

http://bba-reman.com/content.aspx?conte ... rol_Module

but still no joy.

Line 8 of that procedure states hold the lock button for 10 secs, is this with the key in the ignition and still turned on (from line 7)

Cheers folks,

Garry

[teamster1975]

Does the led light up when you press the button on the key? If not you can solder on a replacement. Failing that you may need to do a bsi reset

[teamster1975]

BSI reset procedure!

http://www.bba-reman.com/content.aspx?c ... ol_failure

[Garry]

Does the led light up when you press the button on the key? If not you can solder on a replacement. Failing that you may need to do a bsi reset

There's no light on my key, and I've tried the reset but no joy, that is if I'm doing it right (see above)

[teamster1975]

It could be the button on the key; is it a 2 or 1 button key?

[Garry]

2 buttons. Just metered both. All OK. Had a look at the solder joints aswell, SMT components so hard to see but they look OK too. I'm at a loss with this one!!!

[teamster1975]

Very strange.
The buttons went on my key, I managed to get a fine needle tip iron on them to replace them.