Leather Seats
Moderator: Moderators
-
jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
Re: Leather Seats
well seeing as i just bought a 406 estate i have no use for a van
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
-
steve_earwig
- Moderator
- Posts: 19812
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Leather Seats
The truth is I'm a bit nervous of driving the new Pug in the snow, something like that would be perfect for this winter & either flog the spring when prices go up or to keep as a load lugger. Sadly here something like that would cost well over a grand, plus another £800 to register & insure. I wish I could stick to clunkers like I did in the UK but parts are pricey, breakers yards are very thin on the ground and cars still have a value until well after they're garbage anyway. (quick check of the ads: £300 buys a very old Opel Rekord for breaking.)
Sorry, hijack over.
Sorry, hijack over.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: Leather Seats
Still waiting to get these put in, i'm so slow!!
If ignorance is Bliss then why isn't the world a happier place?
Re: Leather Seats
Ok guys i've had a look and am completely lost.
maybe someone could answer a few questions for me.
1) Currently my seats are still on the slide rail and the new seats have been bolted to that, will this cause a problem when i get these powered up?
2) I have gone through each page of the Haynes Manuel and i cannot find a wiring diagram for the electric seats, does anyone have one they can post up.
3)the seats i have in have wires coming from the middle of the seat but they seem to go under a plastic flap bolted to the floor and then into the carpet, is this normal, any idea where these may be going??
4) Heated seats, i can't find the plugs for these on the seats, what does the wiring loom look like and where does this connect into.
I am very lost with this.. went to an Auto Electrician to see how much they would quote (hoping it would be under £100) but as they quoted me £200 i'll battle through, any answers will be welcomed.
Also if anyone has any pics on how these should be connected that would be AWESOME.
P.s these are my electric seats:
maybe someone could answer a few questions for me.
1) Currently my seats are still on the slide rail and the new seats have been bolted to that, will this cause a problem when i get these powered up?
2) I have gone through each page of the Haynes Manuel and i cannot find a wiring diagram for the electric seats, does anyone have one they can post up.
3)the seats i have in have wires coming from the middle of the seat but they seem to go under a plastic flap bolted to the floor and then into the carpet, is this normal, any idea where these may be going??
4) Heated seats, i can't find the plugs for these on the seats, what does the wiring loom look like and where does this connect into.
I am very lost with this.. went to an Auto Electrician to see how much they would quote (hoping it would be under £100) but as they quoted me £200 i'll battle through, any answers will be welcomed.
Also if anyone has any pics on how these should be connected that would be AWESOME.
P.s these are my electric seats:
If ignorance is Bliss then why isn't the world a happier place?