front fog lights

[jbh325i]

right not sure where i stand with all this newer stuff .. can i retro fit front fog lights into my 98 406 ? ive done it with the E30s a few times so hoping i can do it with the 406.. so what do i need? is the wirring there or would i need to butcher the loom ?

[Captain Jack]

Wiring is all there. You need:

Front fog lights (duh)
A new light stalk (the one on the left) with a front fog light switch - £10 from eBay
A 5-pin relay to go under the drivers dash

Front fog lights are a bit of a pain to fit as it's generally a front bumper off job. Time consuming but not difficult. Also, make sure all that bracketry/springs/fittings come with the fog lights. I had to improvise the fitting as I just got the lights themselves without fittings.

[jbh325i]

cheers for that captain. its straight forward then thats good to know.

[swiss]

Fitted fogs to my D8 saloon without removing the bumper. Pain in the arse though, may have been easier to whip the bumper off after all. Got a relay and stalk from the scrappers. What I haven't been able to locate is a stalk with front fog switch and a horn. All the cars with fogs down the scraps have horns on their steering wheels.

Thus at the moment I've got the stalk with fog switch off and the old one back on. So no front fog functionality, but I need to be able to parp at the brainless morons that are Southampton motorists.

[Captain Jack]

All the cars with fogs down the scraps have horns on their steering wheels.

Probably because they are early D9s

[swiss]

Depends if early D9s have the old slotted grille. I dunno. Not too bothered at the mo, I've only actually had to use the fogs one since installing them. The horn, meanwhile, is a necessity 'round these parts

[steve_earwig]

Like the guy I was telling how to remove the horn pad to on HJ - on a 2000