Height Adjustable Headlamp problem

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
Maranman
1.8 8v
Posts: 36
Joined: Sun Apr 01, 2007 3:04 pm
Location: Marlborough, Wiltshire, UK

Height Adjustable Headlamp problem

Post by Maranman »

:oops: Like a complete twat! I accidentaly disconected the adjusting motor unit from the rear of the headlamp unit instead of the cover for the sidelight which has blown.

I do have a Haynes but can't find it :evil:
Its been "tidied" away due to Christmas grrr

If I had had it then I would have checked the bulb changing procedure before fiddling - of course :twisted: Don't we all.....

ANYWAY, now thats off my chest, the problem is that the headlamp is pointing at the tarmac about 6 feet off the bonnet which ain't good in these foggy conditions.

When I realised what I had done, I thought that I would just poke it back and hey presto but NO! don't be silly it has to be MUCH more Puggy complicated :(

In the absence of Mr Haynes, can anybody give me a clue what to do. :wink:

Merry Christmas
V6Exec
3.0 24v
Posts: 535
Joined: Mon Apr 23, 2007 11:17 pm
Location: Herts

Re: Height Adjustable Headlamp problem

Post by V6Exec »

Response given in your other thread.

Good luck :cheesy:
Remember - it only takes a few inches of water to drown a 406 don't make the same mistake I made! The V6 Exec is no more.

406 Coupe S HDi

PP2000 clone interface
Post Reply