hI ALL,
Just bought a 97 1.9 td with a clarion cd multichanger. Its not connected to the cassette head unit as far as i can tell but has its own small control unit. This is attached to what i presume is an amplifier above the passenger footwell which is in turn connected by a cable to the multichanger in the boot. The trouble is the power feed to the amp has been disconnected. There are 2 wires, one yellow with an inline fuse, the other red that connect to the 'amp'. Any ideas how or where to connect these??
Many thanks,
rich
CLARION CD CHANGER AMP POWER FEED WIRING
Moderator: Moderators
Re: CLARION CD CHANGER AMP POWER FEED WIRING
ok so iv'e found out that the yellow wire is to ignition/on off power and the red wire is to constant power feed (battery). Or is that the other way round!? Still dont know where to wire these in to. Its a peugeot supplied changer as fitted to the car originally(i think). Theres a black ariel lead that went from the phillips head unit to the changer amp with another black lead between the two which may plug into back of head unit
cheers
cheers
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
Re: CLARION CD CHANGER AMP POWER FEED WIRING
sounds like an FM modulator changer, you'll need to find out what frequency it runs on, i had an old sony one that worked arround the 88.x frequency, the changer is connected to the thing you think is an amp, which is supplied with an earth, permenant live and ignition feed, this little box the has the aerial conected to it which then connects to the radio aerial port, there should be a small control pad that changes the discs and switches the unit on/off
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: CLARION CD CHANGER AMP POWER FEED WIRING
See if you can get any model numbers or anything off it, then stick it in a search engine.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: CLARION CD CHANGER AMP POWER FEED WIRING
yes it does have alittle control box and the model is a fmc 200 which hasnt shown up much on google!
cheers chaps rich
cheers chaps rich
Re: CLARION CD CHANGER AMP POWER FEED WIRING
but still dont know where to wire it into?
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
Re: CLARION CD CHANGER AMP POWER FEED WIRING
where are the two wires connected to, the power supply or the box
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
Re: CLARION CD CHANGER AMP POWER FEED WIRING
hi
they are wired up to a sort of amp that is earthed to the chassis. out of this comes all the connections to head unit and changer. looks like theyve been cut and are loose
they are wired up to a sort of amp that is earthed to the chassis. out of this comes all the connections to head unit and changer. looks like theyve been cut and are loose