B/P 5 Disk cd changer Activation/coded..?

[steve_earwig]

Interesting. I was just trying to see if that matched anything Sedre was showing me, it doesn't

fwiw
01 8497 : radio telephone/CD changer transmitter receiver earth
02 8491 : compact disc changer CAN low
03 8499 : + radio transmitter receiver Tel/CD changer battery
04 8407 : Right-hand audio CD changer command
05
06
07 8490 : compact disc changer CAN high
08 8408 : Audio earth command
09
10 8406 : Left-hand audio CD changer command
11
12

[lozz]

Thanks steve.

[steve_earwig]

Eh? This is the HU, which I just remembered you have a pin out for (any chance of posting it?) I was seeing how this compared to the HU hook up in the link, it's obviously complete ballcocks.

This is the CD end:
01 8490 : compact disc changer CAN high
02
03 8497 : radio telephone/CD changer transmitter receiver earth
04
05 8407 : Right-hand audio CD changer command
06 8406 : Left-hand audio CD changer command
07 8491 : compact disc changer CAN low
08
09 8499 : + radio transmitter receiver Tel/CD changer battery
10 8408 : Audio earth command

[lozz]

Hi,

This is what ive got for the RD4 unit:

Pin1-Ground CDC
Pin2-Data-can -Low.
Pin3-+ Battery.
Pin4-Right-Audio.
pin5-Not used N/A
pin6-Not used N/A
pin7-Can Data-High.
pin8-Audio-Ground.
pin9-Not used -N/a
pin 10- Audio/left.

Pins 11 & 12 Not used,.

Im not sure if that's correct either.. theres not many good sources for wiring diagrams out there,.


Again,thanks for your help its much apreciated,.

[steve_earwig]

Pfft, only thank me if I can find something useful

Last night I tried a whole load of different RPOs but I got the same CD diagram for everything I looked at Although at one point I must have done something different as it gave me an option for sat nav and then I got a HU with 2 aux inputs And today I can't find it again

[lozz]

(" it gave me an option for sat nav and then I got a HU with 2 aux inputs")

Hi steve,.

there is two Aux input's.

1 of them is already wired in to something (slot marked 2 in the pic/slot marked 1 is empty)..altho im not sure what..theres no sat nav or any other tat.
just a stupid MFD set up thats s'posed to have built in diagnostic for the car etc.
the radio controls all that..so icarnt bin it and throw in something more useful,.

Ithink the cd changer..the ebay dude sold me is for a RD3 set up.. which is too old for the car

[steve_earwig]

It does indeed look the same as the sockets on the back of my RD3

I saw something about someone found some sort of bluetooth plugged into one of the aux sockets. The yoyo already had something plugged into the CD player socket, I just tried unplugging it but half the dash died, obviously using it for the power for something, maybe that's all you have there.

There's also loads of stuff about a telephone microphone, a USB socket, all sorts of crap.

It's starting to look like the only thing you'll be able to do is run a socket in to the 2nd aux channel and play an MP3 player through it

[lozz]

Thanks steve.

im just going to bin the thing and upgrade it,

just found this on ebay.. http://www.ebay.co.uk/itm/PEUGEOT-207-M ... 3f41011876

[steve_earwig]

Fair enough mate, seems a bit pricey but it's about the same as a connects2 and it'll do everything you want without being a bodge. It's a shame the pictures are crap as you can't check the socket for your existing wiring and CD changer.

Hold on a mo, you send them your vin number, they have your address...

[lozz]

Yeah iagree..it seem's abit pricey.
there is cheaper ones on the bay/but they will be sent out needing vin coding
and the maindealer wants the Vin number for the original coding..

Seen this too.. http://www.ebay.co.uk/itm/Car-Stereo-fo ... 4ac8f7aff6

again..abit pricey..and idont fancy sending that much coin to wrong kong.

[steve_earwig]

Wince

Yep, I certainly did when I saw the price

I think you can sort the vin coding thing out with PP.

[lozz]

(I think you can sort the vin coding thing out with PP.)

^

its something idont have access too,
iactualy bought the pp2000 kit once..but it went missing in post or was never sent out in first place..

[jasper5]

Lozz, I have just done one of these this morning for a customer....he bought a cable and fitted it himself and I activated it through Diagbox...couldn't get PP2000 to activate it (mine has both options). Took me 10 minutes to activate it once I worked out how to access the correct menu.

If you decide you want yours activating let me know and I'll run over with my kit.

[lozz]

Thanks jasper.

i'still havent found the correct lead for it yet..so icarnt do anything with it,
no one seems to have one..incl the main dealer's

one will turn up eventualy on ebay iguess.

thanks.