Modifying my 406

Just your normal general chatting in here..

Moderator: Moderators

Post Reply
406loon
2.0 16v
Posts: 137
Joined: Sun Jul 10, 2011 12:40 am
Location: Shrewsbury

Modifying my 406

Post by 406loon »

After owning this car for 2 months I have done the following:-

Fitted BMC-CDA cold air induction kit, EGR pipe blanked, coupe strut brace, rear lower brace, knocked out the cat/dpf internals and applied the defap/180 remap to the ECU. I have a 306 HDi powerflex lower engine mount to go on and in the near future will be doing the brembo brake conversion.

I cant find alot of "bolt on" parts for the 406 so was wandering if there are any other bits and pieces from other Peugeots etc I can buy as an uprated addition? Eventually when funds permit I will be fitting some team dynamics 17s and an FK coilover kit but for now just looking for cheap ish modifications.

Any ideas?


Alex
53' 406 2.2 HDi SE saloon - Samarkan Blue

Coupe strut brace-BMC CDA-Bosch Aero wipers-2.5'' T304 fap back exhaust-de-cat/dpf internals-EGR blank-180bhp remap-Ultra Racing rear lower brace-Poly engine mount- Brembo calipers-braided hoses-LEDs-55w Xenon 6k kit-nightbreaker plus main+fogs-LED sidelights
User avatar
waue1978
HDi don't believe it!
Posts: 2341
Joined: Fri Jan 29, 2010 1:56 pm
Location: Andover, Hampshire

Re: Modifying my 406

Post by waue1978 »

As far as extra performance goes, I haven't really done anything, but if you're just looking for budget bits, the non-smoker kit that replaced the ashtray on mine is worth the money. No more than £25 to buy new. JBL speakers & tweeters can be bought cheap from a breaker, but you need to solder a capacitor into the tweeters so that they don't blow. Himbigchief has a Laguna splitter for sale for £15 which is half what they go on Ebay for, or if you feel adventurous, you could tour the scrapyards for an alternative.

Apart from that, I can't think of much as my biggest mod was to upgrade the interior to the same spec as yours comes as standard.
2000/X Peugeot 406 110 HDi LX Family 93k to 2000/W BMW 530D SE Auto 84k to 2003/03 Peugeot Partner Hdi Escapade 98k to 2003/53 Vauxhall Zafira DTi Elegance 74k

Image
406loon
2.0 16v
Posts: 137
Joined: Sun Jul 10, 2011 12:40 am
Location: Shrewsbury

Re: Modifying my 406

Post by 406loon »

I have the non smoker kit fitted and Im not sure but think my car has the JBL fancy speakers and amp. I am after the exec parcel shelf but cant find any for the mk2 at the moment as I understand the mk1 doesnt fit.

There is a carbon fibre splitter specially made for the 406 which I will order as soon as the front end is out of the body shop.

I went to my local breakers and found several coupes in there but didnt see anything that was worth having. Any other bits off coupes which are worth looking into? I have heard he rear arb on the coupe is slightly thicker than the saloon?
53' 406 2.2 HDi SE saloon - Samarkan Blue

Coupe strut brace-BMC CDA-Bosch Aero wipers-2.5'' T304 fap back exhaust-de-cat/dpf internals-EGR blank-180bhp remap-Ultra Racing rear lower brace-Poly engine mount- Brembo calipers-braided hoses-LEDs-55w Xenon 6k kit-nightbreaker plus main+fogs-LED sidelights
User avatar
waue1978
HDi don't believe it!
Posts: 2341
Joined: Fri Jan 29, 2010 1:56 pm
Location: Andover, Hampshire

Re: Modifying my 406

Post by waue1978 »

Easy way to tell if you have JBLs is to pop the tweeters out. If the underneath is black plastic, they are the standard ones as the JBLs are silver & have JBL written on them. Tweeters just prise out with a screwdriver.
2000/X Peugeot 406 110 HDi LX Family 93k to 2000/W BMW 530D SE Auto 84k to 2003/03 Peugeot Partner Hdi Escapade 98k to 2003/53 Vauxhall Zafira DTi Elegance 74k

Image
User avatar
OdinEidolon
3.0 24v
Posts: 1166
Joined: Wed Apr 13, 2011 5:24 pm
Location: Belluno, Italy

Re: Modifying my 406

Post by OdinEidolon »

Did the EGR blanking improve anything?
Does it have drawbacks apart from the longer heat up time?
2001 2.2HDi saloon Executive (not the English exec, worse!) in Obsidian Black. Semi-Mux D9, build code 8761
Image
Image
Want a remap? Contact us, learn to do it yourself on ecuedit.com or let the professionals of editecu.com do it for you!

ecuedit.com | carecus.com | editecu.com | boschecus.com | carsrubber.com | egrswitch.com | car-specification.com
User avatar
sirwiggum
3.0 24v
Posts: 3070
Joined: Thu Apr 01, 2010 2:32 pm
Location: out in the Sticks, Northern Ireland
Contact:

Re: Modifying my 406

Post by sirwiggum »

I disconnected my EGR, left it hanging.

Didn't notice much different, but meant the muck wasn't being fired back in.

Cheap mods - spray the centre console silver?

Mudflaps?

The Laguna splitter.
1999 Honda Accord Coupe 2.0 Vtec Automatic
Previously 2002 406 HDi 90 Rapier Monaco Blue
Welly wrote:something to do with rubber/splits/bursts/flat/floppy etc
Image
FarmerPug
2.0 HDI 110
Posts: 9656
Joined: Tue Jun 01, 2010 5:42 pm
Location: The Countryside, Northern Ireland
Contact:

Re: Modifying my 406

Post by FarmerPug »

OdinEidolon wrote:Did the EGR blanking improve anything?
Does it have drawbacks apart from the longer heat up time?
i paid £5 for the blanking plate on my 2.0 hdi and it didnt really make much of a difference to be brutally honest, and i plan to de blank it at the weekend with the weather getting colder i dont want to find out if it affects heat up time, a bottle of egr cleaner isnt too expensive either.
406loon
2.0 16v
Posts: 137
Joined: Sun Jul 10, 2011 12:40 am
Location: Shrewsbury

Re: Modifying my 406

Post by 406loon »

Blocking the EGR is supposed to have an adverse affect on cold running and it has on my car - takes longer before its running smoothly, so I dont boot it until the oil & engine temp are at optimum levels. The benefit of the engine no longer breathing its emissions outweigh that though. When I examined the EGR pipe and noticed the diameter of the pipe was mostly blocked with black sludge was quite horrified. I think really the next job to do is clean the inlet manifold out. - Not sure how big a job this is though.
53' 406 2.2 HDi SE saloon - Samarkan Blue

Coupe strut brace-BMC CDA-Bosch Aero wipers-2.5'' T304 fap back exhaust-de-cat/dpf internals-EGR blank-180bhp remap-Ultra Racing rear lower brace-Poly engine mount- Brembo calipers-braided hoses-LEDs-55w Xenon 6k kit-nightbreaker plus main+fogs-LED sidelights
Post Reply