307 alloy wheels.

lozz · Post by **lozz** » Thu Sep 11, 2014 11:24 pm

For sale
4x pug 307 alloy wheels.. 16 inch.

Bought these to fit on a 207 but they 'scrub on the rears..so they're no good to me

Offers ..over 50 notes the set.

Location Manchester.

hucky · Post by **hucky** » Fri Sep 12, 2014 12:08 pm

any pictures??

lozz · Post by **lozz** » Fri Sep 12, 2014 2:59 pm

Hi mate
Here's the link I bought them from hopefully it will work at your end

http://www.ebay.co.uk/itm/121423336784? ... EBIDX%3AIT

hucky · Post by **hucky** » Fri Sep 12, 2014 3:55 pm

the tires still on as well? if so ill give you 50 for them. see if they fit the coupe

lozz · Post by **lozz** » Fri Sep 12, 2014 4:03 pm

Yeah tyres are still on..

Rims are not too bad they just need a good scrub..
And a tidy up.

hucky · Post by **hucky** » Fri Sep 12, 2014 4:14 pm

where in manchester are you?

lozz · Post by **lozz** » Fri Sep 12, 2014 4:21 pm

On the outskirts of Oldham.. not far from ashton-u-lyne

highlander · Post by **highlander** » Fri Sep 12, 2014 6:39 pm

hucky wrote:the tires still on as well? if so ill give you 50 for them. see if they fit the coupe

Wheels off a 307 will need spacers in order to keep the same track width on a 406. Not much, mind - can't remember the difference between 307 offset and 406 offset.

I had 307 "Apollo" (7-spoke) alloys on my old 406 saloon - the PCB (4x108) and hub bore (65.1mm) are the same between the two, so they fit just fine; they just sat further inside the wheel arches than the stock 406 steel wheels did. Spacers weren't necessary, but would have been nicer looking. 10 - 15mm hubcentric spacers would do a decent job.

Those wheels will look nice on a 406 though!

gumby6371 · Post by **gumby6371** » Fri Sep 12, 2014 6:45 pm

I have a set of 20mm hub centric spacers for sale if you're interested?

dirtydirtydiesel · Post by **dirtydirtydiesel** » Fri Sep 12, 2014 9:53 pm

Std 406 wheels are 18mm offset, coupes are 12mm offset,
307 are 27-31mm offset so you need 20mm hubsentric spacers to run 307 wheels on a 406

10-15mm at the very least that's why they rubbed on lozz's 206

Hope this help's DDD.

lozz · Post by **lozz** » Fri Sep 12, 2014 10:25 pm

Yeah they 'rubbed on rear wheel arch liner's
I didn't fancy messing with 'spacers... gutted really as there nice rim's.

Just need em gone now as there in the way...

If there not gone in week or so I will cut the tyres off and take them to the none-ferous bridge of weighs'.

First 40 notes takes em'

dirtydirtydiesel · Post by **dirtydirtydiesel** » Fri Sep 12, 2014 11:50 pm

Your'll only get a fiver a wheel lozz, trust me I know

Stick em on flea bay for £60 buy it now, they'll go

lozz · Post by **lozz** » Sat Sep 13, 2014 12:02 am

I don't bother with eBay mate

I've weighed a fair few alloys in they is worth around 12-18 quid a rim'
If you've been getting a fiver for them you've been getting ripped mate.

They isn't worth much with tyres on mind they deduct 3-4 quid a rim if tyres or on..
These wheels is to good for scrap tho I'd sooner not weigh em in what ever there worth..

406oc.co.uk

307 alloy wheels.

307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.

Re: 307 alloy wheels.