How does the headlining come out
Moderator: Moderators
-
- 2.0 HDI 110
- Posts: 9656
- Joined: Tue Jun 01, 2010 5:42 pm
- Location: The Countryside, Northern Ireland
- Contact:
How does the headlining come out
I was just thinking about this today, i was in a real shabby car one day its headlining was all plastered in paint, cows dung, and other matter purely out of interest how would someone even begin with the job of getting the headling out of a car, it looks harder to do than taking an engine out
- HimBigChief
- 3.0 24v
- Posts: 1104
- Joined: Tue Dec 09, 2008 5:05 pm
- Location: Rural Northumberland
- Contact:
Re: How does the headlining come out
Drop down the A, B and C pillar covers, remove grab handles, interior lights and anything else that may be holding the lining up, then pull the lining down. It's likely to be glued on so you'll need to be careful taking out the one you're going to fit back into your car.
-
- 2.0 HDI 110
- Posts: 9656
- Joined: Tue Jun 01, 2010 5:42 pm
- Location: The Countryside, Northern Ireland
- Contact:
Re: How does the headlining come out
but how does it get out of the car when its loose, does it fold over and go out a door
- HimBigChief
- 3.0 24v
- Posts: 1104
- Joined: Tue Dec 09, 2008 5:05 pm
- Location: Rural Northumberland
- Contact:
Re: How does the headlining come out
Yeah, I'd suspect so. I had to do a sunroof assembly on a 405 many moons ago and we were able to get all that in and out through the doors.