noticed my aux belt has a groove on it on the back as you look were it goes around the alternator, i only had it changed 3 months ago,
the grove seems to run all round the belt , is this normal i didnt take notice of my old one,
its on the back - smooth side of the belt
Aux Belt
Moderator: Moderators
-
- Site Admin & Mad Biker!
- Posts: 6277
- Joined: Sun Oct 28, 2007 8:07 pm
- Location: Woking, Surrey
Re: Aux Belt
It should be smooth on the back, sounds as though something has carved a gouge in it unless I'm mistaken!
It's a real piece of p1ss to change, definitely a diy job.

It's a real piece of p1ss to change, definitely a diy job.
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there

1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Aux Belt
i thought it should be smooth, i will take it back to the garage 2moro and see what they say, might be under warranty yet if its the belt at fault.
2004 (04) Volkswagen Bora 1.9 TDi (100)
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Aux Belt
went back to the garage today, he said it isnt right, its wearing wrong with the groove,
what could cause this, the smooth side of the belt has a groove in it and its now not smooth anymore its rough
i can only see the 1 pulley that the belt goes round touching the smooth side, could that pulley be on its way out ?
i have to go back monday and he will look closer into it he was busy today,,,
what could cause this, the smooth side of the belt has a groove in it and its now not smooth anymore its rough

i can only see the 1 pulley that the belt goes round touching the smooth side, could that pulley be on its way out ?
i have to go back monday and he will look closer into it he was busy today,,,
2004 (04) Volkswagen Bora 1.9 TDi (100)