Fix or scrap??
Moderator: Moderators
Fix or scrap??
Right
Im at a complete loss as to what to do with this car
fitted a new crank position sensor
and a new pump
which got the car running
but i still have this awful hesitation
while driving it just misses and my head almost hits the windscreen
i have no idea what is up i have tried to reset the ecu which helped a bit
but something (electrical??)
is still up - possible ecu problem??
have just spent £90
in parts and am loathed to spend any more really
unless i know it will fix it
thinking i will take the parts off i have put on and a few others then scrap it
does anybody have any ideas before i do that??
thanks for your help and time as always
keys
Im at a complete loss as to what to do with this car
fitted a new crank position sensor
and a new pump
which got the car running
but i still have this awful hesitation
while driving it just misses and my head almost hits the windscreen
i have no idea what is up i have tried to reset the ecu which helped a bit
but something (electrical??)
is still up - possible ecu problem??
have just spent £90
in parts and am loathed to spend any more really
unless i know it will fix it
thinking i will take the parts off i have put on and a few others then scrap it
does anybody have any ideas before i do that??
thanks for your help and time as always
keys
1996 Peugeot 406 1.8 16V
Re: Fix or scrap??
forgot to say thye fuel system was almost completely dry
is it possible that there is still air in the system
or a clogged pipe or something?
oh and D98 1.8 16v
cheers
is it possible that there is still air in the system
or a clogged pipe or something?
oh and D98 1.8 16v
cheers
1996 Peugeot 406 1.8 16V
- jamjar1383
- 3.0 24v
- Posts: 542
- Joined: Sun Mar 02, 2008 7:24 pm
- Location: llanelli, south wales
Re: Fix or scrap??
changed the fuel filter???
camshaft senosr?
blocked cat?
there's 3 for u to start with, although some more detail is needed if you could add any other symtoms you can think off
camshaft senosr?
blocked cat?
there's 3 for u to start with, although some more detail is needed if you could add any other symtoms you can think off
d9 hdi 90 rapier estate
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
Re: Fix or scrap??
had a service a week b4 all the problems so all filters changed new oil + plugs
the car is idling ok now
but under load needs more revs than it should
it is occasionally slower to start
seems to be worse the warmer it gets
stutters under mild- medium throttle
seems the throttle has to be at just the right revs then it runs without missing or spluttering
has also had a new lamba sensor in last year
just cracked the ecu open to dr it out
no signs of visible moisture
left on rad for an hour - now sealed with a silica sachet inside to rule out moisture
also i have had water in the footwell behind driver since this happened
not sure whether its coming in or if its melted snow still trapped in there will try and dry it out but its takin foreva
oh also the window went into safety mode (had to press the buton 6-7 times to get it to close) the other night
im guessing the electrics are shot to hell
and scrapyard is the answer
but tought id have 1 final ask
sorry for another long one - wanted to add all i could
cheers keys
edit: how would i check the cat?? take off?
the car is idling ok now
but under load needs more revs than it should
it is occasionally slower to start
seems to be worse the warmer it gets
stutters under mild- medium throttle
seems the throttle has to be at just the right revs then it runs without missing or spluttering
has also had a new lamba sensor in last year
just cracked the ecu open to dr it out
no signs of visible moisture
left on rad for an hour - now sealed with a silica sachet inside to rule out moisture
also i have had water in the footwell behind driver since this happened
not sure whether its coming in or if its melted snow still trapped in there will try and dry it out but its takin foreva
oh also the window went into safety mode (had to press the buton 6-7 times to get it to close) the other night
im guessing the electrics are shot to hell
and scrapyard is the answer
but tought id have 1 final ask
sorry for another long one - wanted to add all i could
cheers keys
edit: how would i check the cat?? take off?
1996 Peugeot 406 1.8 16V
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Fix or scrap??
what about spark plugs and the spark plug leads ?
i wouldnt scrap it tho if you have spent money on it, i would be more determined to get it sorted
how many miles has it done,
i wouldnt scrap it tho if you have spent money on it, i would be more determined to get it sorted
how many miles has it done,
2004 (04) Volkswagen Bora 1.9 TDi (100)
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Fix or scrap??
ok just read the bit were you said its had plugs
have the spark plug leads been changed ? for the price i would definately do them

have the spark plug leads been changed ? for the price i would definately do them
2004 (04) Volkswagen Bora 1.9 TDi (100)
Re: Fix or scrap??

other than that its a Guessing game sadly which ive had with cars myself before and thrown good money away

it couid be anumber of things :
iagree as above check the cat for being blocked -if it is it will be choking the car,
or try unplugging the Maf and see if it makes a diference

Re: Fix or scrap??
no plug leads gary
shite electronics control everything
wish it had leads and a carb... so much
right anyway just took it out to get some baccy
and to see if any better
got into town fine
stopped and started a few times
on way home
went weird again
when pressing throttle would splutter
then i would lift of throttle and revs would rise and would sound good
was idling ok still
had to drive home in first on idle last 2 miles
then conked out just b4
put 1 gallon in then it started fine
just about got me home
i dont understand
i only put a 10er in yesterday and it did no miles
must be a leaking fuel pipe or something
scrapyard i think
cheers for all the help guys
shame its still only done 88k
can not put more money in now
so is there a breaking thread somewhere??
shite electronics control everything
wish it had leads and a carb... so much
right anyway just took it out to get some baccy
and to see if any better
got into town fine
stopped and started a few times
on way home
went weird again
when pressing throttle would splutter
then i would lift of throttle and revs would rise and would sound good
was idling ok still
had to drive home in first on idle last 2 miles
then conked out just b4
put 1 gallon in then it started fine
just about got me home
i dont understand
i only put a 10er in yesterday and it did no miles
must be a leaking fuel pipe or something
scrapyard i think
cheers for all the help guys
shame its still only done 88k
can not put more money in now
so is there a breaking thread somewhere??
1996 Peugeot 406 1.8 16V
Re: Fix or scrap??
Gaz may not be right on the leads but he may be close,keys84 wrote:no plug leads gary
shite electronics control everything
wish it had leads and a carb... so much
right anyway just took it out to get some baccy
and to see if any better
got into town fine
stopped and started a few times
on way home
went weird again
when pressing throttle would splutter
then i would lift of throttle and revs would rise and would sound good
was idling ok still
had to drive home in first on idle last 2 miles
then conked out just b4
put 1 gallon in then it started fine
just about got me home
i dont understand
i only put a 10er in yesterday and it did no miles
must be a leaking fuel pipe or something
scrapyard i think
cheers for all the help guys
shame its still only done 88k
can not put more money in now
so is there a breaking thread somewhere??
Have you checked the coil packs?
if the car is down on a cylinder it will drink fuel,
Dont give up just yet keep looking it may be something Simple thats easy/cheap to fix,
Best of luck anywayz
Re: Fix or scrap??
I have thought about that
but it is idling fine which says to me they are ok
im not claiming to be the expert
what do you think??
but it is idling fine which says to me they are ok
im not claiming to be the expert
what do you think??
1996 Peugeot 406 1.8 16V
Re: Fix or scrap??
Plenty of threads lately with people having problems only to find connectors under the carpet have corroded due to water ingresskeys84 wrote:
also i have had water in the footwell behind driver since this happened
not sure whether its coming in or if its melted snow still trapped in there will try and dry it out but its takin foreva
Therefore if it was me, i'd be checking these first
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Fix or scrap??
ok no leads . i didnt know that, you learn sumthing everyday ..
i thought all petrol engines had plugs and leads

i thought all petrol engines had plugs and leads


2004 (04) Volkswagen Bora 1.9 TDi (100)
Re: Fix or scrap??
i didnt know that till i got this one
anyway at least you had the sense to buy a diesel
without all that crap
will check under the carpet
where would they be in the tunnel part??
or under the footewell?
anyway at least you had the sense to buy a diesel
without all that crap
will check under the carpet
where would they be in the tunnel part??
or under the footewell?
1996 Peugeot 406 1.8 16V
-
- Site Admin & Mad Biker!
- Posts: 6277
- Joined: Sun Oct 28, 2007 8:07 pm
- Location: Woking, Surrey
Re: Fix or scrap??
The 1.8 has the well plugs integrated into a coil pack; not cheap either unless you get a good one from a breakers.Gary406 wrote:ok no leads . i didnt know that, you learn sumthing everyday ..
i thought all petrol engines had plugs and leads![]()
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there

1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"