Mr.Clutch Center's
Moderator: Moderators
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Mr.Clutch Center's
has any1 ever used a mr.clutch center
think its time for them to do a free clutch test on mine
since i only had fitted 10 month ago and its juddering bad
EDIT - Mr clutch didnt fit it
think its time for them to do a free clutch test on mine
since i only had fitted 10 month ago and its juddering bad
EDIT - Mr clutch didnt fit it
2004 (04) Volkswagen Bora 1.9 TDi (100)
-
- Site Admin & Mad Biker!
- Posts: 6277
- Joined: Sun Oct 28, 2007 8:07 pm
- Location: Woking, Surrey
Re: Mr.Clutch Center's
A mate of mine has used them, they did a good job as far as we could tell & that was a few months ago. £350 from memory all in?
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there

1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Mr.Clutch Center's
ye sounds about right, think im gonna have to bite the bullet and have another in
only this time pay the real amount and not £180 like the last one 10 month back
its the only thing i hate on my car atm,
only this time pay the real amount and not £180 like the last one 10 month back
its the only thing i hate on my car atm,
2004 (04) Volkswagen Bora 1.9 TDi (100)
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: Mr.Clutch Center's
Dosen't sound like the clutch. XUD cluthes are cheap. Maybe it hasen't been aligned properly? tried changing the clutch cable?
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
Re: Mr.Clutch Center's
IIRC there are some shockingly bad reviews online
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Mr.Clutch Center's
hmmmm really ?plod wrote:IIRC there are some shockingly bad reviews online
2004 (04) Volkswagen Bora 1.9 TDi (100)
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Mr.Clutch Center's
yes cable been changed , no change only clutch pedal was lighter and still is lighterBailes1992 wrote:Dosen't sound like the clutch. XUD cluthes are cheap. Maybe it hasen't been aligned properly? tried changing the clutch cable?

2004 (04) Volkswagen Bora 1.9 TDi (100)
Re: Mr.Clutch Center's
http://www.reviewcentre.com/reviews95849.htmlGary406 wrote:hmmmm really ?plod wrote:IIRC there are some shockingly bad reviews online
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Mr.Clutch Center's
now im not going to Mr clutch after all



2004 (04) Volkswagen Bora 1.9 TDi (100)
-
- Site Admin & Mad Biker!
- Posts: 6277
- Joined: Sun Oct 28, 2007 8:07 pm
- Location: Woking, Surrey
Re: Mr.Clutch Center's
I guess my mate was bloody lucky then!
Edit: Actually one of the only good reviews was for Slough branch which they used. Phew!
Edit: Actually one of the only good reviews was for Slough branch which they used. Phew!

1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there

1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Mr.Clutch Center's
not all people will be un happy,
you cant please every1
you cant please every1

2004 (04) Volkswagen Bora 1.9 TDi (100)
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: Mr.Clutch Center's
I reckon the clutch hasen't been aligned. I have the same problem with my Focus. But it only happens when you come off the clutch slowly around 1200rpm. If you bring the revs up a little and come off the clutch abit quicker than normal it's fine and perfectly smooth. Just took abit of gettign used to.
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Mr.Clutch Center's
ye i have exact same thing
if i rev to 2k or even 1.5 and let clutch out slightly faster its smooth .....
so its bad allignment
if i rev to 2k or even 1.5 and let clutch out slightly faster its smooth .....
so its bad allignment
2004 (04) Volkswagen Bora 1.9 TDi (100)
Re: Mr.Clutch Center's
Aligment is only an issue when fitting the gearbox back in, when the clutch is pressed once there is no issue, of course the clutch could get damaged forcing the gearbox back in.
There could be a problem with the pressure plate not being tightened evenly, lack of correct lubrication on the gearbox spigot shaft, incorrect cleaning of the pressure plate surface before fitting (not degreased properly), or the bearing slide not cleaned/lubricated properly....or any number of other reasons, including a faulty clutch.
There could be a problem with the pressure plate not being tightened evenly, lack of correct lubrication on the gearbox spigot shaft, incorrect cleaning of the pressure plate surface before fitting (not degreased properly), or the bearing slide not cleaned/lubricated properly....or any number of other reasons, including a faulty clutch.
- Nicodemus
- 1.8 16v
- Posts: 98
- Joined: Wed Jul 02, 2008 7:14 am
- Location: Adrift on the Sea of Uncertainty...
Re: Mr.Clutch Center's
Exactly what Jasper said.
And if you're not prepared to cough up a few quid extra to get the job done properly then... Well you'll likely have problems.
True mine's a D9Hdi, I got 3 quotes for a new clutch and the best was 399 from the local stealer! Day's work, what with splitting drive shaft and dropping everything out the bottom. But it's lasted a good few miles so far, mustn't grumble...
And if you're not prepared to cough up a few quid extra to get the job done properly then... Well you'll likely have problems.
True mine's a D9Hdi, I got 3 quotes for a new clutch and the best was 399 from the local stealer! Day's work, what with splitting drive shaft and dropping everything out the bottom. But it's lasted a good few miles so far, mustn't grumble...
52 HDI(90) 406 saloon. Sadly no longer owned, bless her she got near 200,000 miles and I had to sell her on, she was still going strong.
Airfix test pilot and part time formula 1 driver for scalextrix
Airfix test pilot and part time formula 1 driver for scalextrix