Peugeot 207 Help needed .
Moderator: Moderators
- sirwiggum
- 3.0 24v
- Posts: 3070
- Joined: Thu Apr 01, 2010 2:32 pm
- Location: out in the Sticks, Northern Ireland
- Contact:
Re: Peugeot 207 Help needed .
To change the sidelight bulb on the Accord coupe, you have to go in through the wheelarch!
Re: Peugeot 207 Help needed .
Ilove working on honda s
theyre so easy, and you dont need no fancy code readers
for eg, air bag light Flashy, just use paperclip in a hidden connector, job done simples,
theyre so easy, and you dont need no fancy code readers

for eg, air bag light Flashy, just use paperclip in a hidden connector, job done simples,
- sirwiggum
- 3.0 24v
- Posts: 3070
- Joined: Thu Apr 01, 2010 2:32 pm
- Location: out in the Sticks, Northern Ireland
- Contact:
Re: Peugeot 207 Help needed .
The feckin oil filter is down the back of the engine block!lozz wrote:Ilove working on honda s
theyre so easy, and you dont need no fancy code readers![]()
for eg, air bag light Flashy, just use paperclip in a hidden connector, job done simples,
Cue oil down the sleeve
Re: Peugeot 207 Help needed .
put small hole in filter first and let it stream out into a container,sirwiggum wrote:The feckin oil filter is down the back of the engine block!lozz wrote:Ilove working on honda s
theyre so easy, and you dont need no fancy code readers![]()
for eg, air bag light Flashy, just use paperclip in a hidden connector, job done simples,
Cue oil down the sleeve
Re: Peugeot 207 Help needed .
@ sirwiggum
what size engine is in your honda ?
do you want to buy a stainless exhaust, got one sat in the garage doing nothing
what size engine is in your honda ?
do you want to buy a stainless exhaust, got one sat in the garage doing nothing

- sirwiggum
- 3.0 24v
- Posts: 3070
- Joined: Thu Apr 01, 2010 2:32 pm
- Location: out in the Sticks, Northern Ireland
- Contact:
Re: Peugeot 207 Help needed .
2.0i VTEClozz wrote:@ sirwiggum
what size engine is in your honda ?
do you want to buy a stainless exhaust, got one sat in the garage doing nothing
A whole exhaust? Might be tempted, I can hear mine getting ever so slightly growly at idle.
What was it off?
Re: Peugeot 207 Help needed .
Ah its off a 1.8 ithink matesirwiggum wrote:2.0i VTEClozz wrote:@ sirwiggum
what size engine is in your honda ?
do you want to buy a stainless exhaust, got one sat in the garage doing nothing
A whole exhaust? Might be tempted, I can hear mine getting ever so slightly growly at idle.
What was it off?

iwill double check tho,
its a Powerflow (Twin -exit) back to middle section,
was only on the car 5mths

- sirwiggum
- 3.0 24v
- Posts: 3070
- Joined: Thu Apr 01, 2010 2:32 pm
- Location: out in the Sticks, Northern Ireland
- Contact:
Re: Peugeot 207 Help needed .
Not sure what spec the exhaust on the US ones are
Its a way of telling the difference on the coupe

The one on the left is mine, 2.0 4 cylinder with exhaust on the right. The one on the right is a V6 with the exhaust on the left.
Back on topic, I think thats a 207 beside them
Its a way of telling the difference on the coupe

The one on the left is mine, 2.0 4 cylinder with exhaust on the right. The one on the right is a V6 with the exhaust on the left.
Back on topic, I think thats a 207 beside them
Re: Peugeot 207 Help needed .
Duno mate,
as of the exhaust, it was originaly on a civic then aparantly made to fit a Accord,
my son bought a civic and iwas going to fit it on that but, he changed his mind and wanted a new standard one on,
it saved me a job tho,
as of the exhaust, it was originaly on a civic then aparantly made to fit a Accord,
my son bought a civic and iwas going to fit it on that but, he changed his mind and wanted a new standard one on,
it saved me a job tho,

Re: Peugeot 207 Help needed .
2006 207 GT THP 150
- Gary406
- The moderator with a 1.9TD!
- Posts: 5315
- Joined: Sun Mar 28, 2010 9:56 pm
- Location: Wigan, Lancashire
Re: Peugeot 207 Help needed .
well i found a much easier way ... battery out. and you can do it from there 

2004 (04) Volkswagen Bora 1.9 TDi (100)
Re: Peugeot 207 Help needed .

Exellent guide mate,
iwouid of flung plastic cover and put wheel back on,

Feck me thats a Mission just to change a bulb,

Re: Peugeot 207 Help needed .
Cheers. About 6 months after that i had to do the drivers side which of course means doing all that carry-on with your left hand.
2006 207 GT THP 150
-
- Newbie
- Posts: 1
- Joined: Wed Apr 08, 2015 5:45 pm
Re: Peugeot 207 Help needed .
Hi guys, apologies if this isn't the right place to ask - my daughters got a 207 (not a 406 so apologies if nobody can help) and is having the exact same problem as described. The wife borrowed her car and yanked off the key fob by accident. So presumably this is the problem for her getting the anti theft message and the car won't start.trem1 wrote: oh right there is a map of pp owners who would help out cheaply if needed
http://maps.google.co.uk/maps/ms?msid=2 ... 1b9c&msa=0
I've found someone close to where we live (Stourbridge uk) using the map, but would it be bad from if i sent him a PM to see if he can help?
Thanks for any advice

-
- 3.0 24v
- Posts: 3579
- Joined: Fri Apr 06, 2012 9:02 pm
- Location: Bournemouth
Re: Peugeot 207 Help needed .
Hi, in the fob is a small chip - this needs to be against the ignition barrel for the cat to 'detect' it and turn the immobiliser off.
As a temporary fix you can sellotape the fob to the cowling next to the ignition, until you get a replacement, I think.....
As a temporary fix you can sellotape the fob to the cowling next to the ignition, until you get a replacement, I think.....
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.