However if it's not that, it'll be the antenna around the ignition barrel. Relatively easy fix. Since every post of mine seems to contain an SB diagram at the moment, why break the chain?

Moderator: Moderators
Thanks for the diagram.jonsowman wrote:Yes the estate does the immob thing if you go from key off to cranking without waiting. I always turn the key to ignition and wait a couple of seconds (usually wait for a few dash lights to go out) and then start it. Never does it.
However if it's not that, it'll be the antenna around the ignition barrel. Relatively easy fix. Since every post of mine seems to contain an SB diagram at the moment, why break the chain?
jonsowman wrote:I tend to get in the car, turn the key to ignition, put my seatbelt on and sort out the radio and climate control, then start. So, about 2-3 seconds?
Those things on the A pillars are just ultrasonic proximity sensors, only used for the alarm system, nothing to do with the immobiliser.
The immobiliser works using NFC (near field communication) with a Philips ID46 chip in the key. It has an area of internal memory that is "write-once". When the key is programmed, a code is written to the device by the car that is subsequently matched against a code in the BSI before the car is allowed to start. If the antenna (or its connection) is faulty, the ID46 can't be read and start authorisation will fail (and you get a MFD message and a dash light).
Out of interest, the "write once" thing is the reason you can't programme a second hand key to a different car. You'd have to buy a "virgin" (i.e. unused) ID46 device.
Edit: picture
Well, I am sure it has come up whilst driving too, so I am thinking there is a definite antenna issue - will keep an eye on it.scotty73 wrote:Haven't we had this immobiliser question before? I seem to remember saying my old xsara did this if I tried to start it a bit quick... Maybe it's that?
Or maybe he wants to go back home? he's realised he's to macho to be tagged with a stupid f*cking knickname thrown a hissy fit thinking he's really a she and wants to go back home for some sanity... or a manicure... see he's confused too.![]()
Sorry - basically, if the car can't read the transponder (thing in the picture) in the key, it won't let the car start. Then you get the faults you're seeing. Primary suspect for this is a dodgy antenna or connection.Sonia406 wrote: Way above my head
I have been given the transponder code for the car, is this something that will need to be used if I replace the antenna?
Me too, but as Jon says - turn ignition on then do your seatbelt, this gives the car a chance to do its proper 'self checks' before turning off some of the dashboard lights - then fire him up.rwb wrote:FWIW: I always put ignition on, let it wake up, then crank. The only time I had this problem was when the aerial was knackered.
The wait is just the habit of waiting for the glow plugs on the XUD I had before the HDi.
You two completely lost me nowrwb wrote:^^ what he says
So if the key is write-once then is the PP2000 programming process to install inthe BSI what's the key?
Or, is it the case that a key works if and only if it's contents match what's in the BSI a priori / from manufacture?
(This is an aside to the matter in hand.)
Well, since you asked...rwb wrote:^^ what he says
So if the key is write-once then is the PP2000 programming process to install inthe BSI what's the key?
Or, is it the case that a key works if and only if it's contents match what's in the BSI a priori / from manufacture?