Yeah, I reckon the 90bhp version would be perfect for the 305, less to worry about too! Might be an idea? Get the it mapped to ~115bhp and it would be a match made in heaven I reckon!FarmerPug wrote:That is the business, and it has been installed very tidily.
I still have the DW10 engine and gearbox sitting about but no ECU. I wonder what suspension bits this guy has changed.
1985 305
Moderator: Moderators
Re: 1985 305
2001/Y Peugeot 406 2.0 HDi Saloon
150hp/330nm • Powerflow stainless exhaust • Kevlar clutch • Cat delete • EGR & Doser delete • Leather interior • Windows tinted • Cruise control • 5 dial cluster • Yatour bluetooth • Starfish alloys • Twin rear fogs
150hp/330nm • Powerflow stainless exhaust • Kevlar clutch • Cat delete • EGR & Doser delete • Leather interior • Windows tinted • Cruise control • 5 dial cluster • Yatour bluetooth • Starfish alloys • Twin rear fogs
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: 1985 305
ECU from a 306 and a custom wiring loom would be a piece of piss for you!
Either that or use a mechanical pump from the XUD?
Either that or use a mechanical pump from the XUD?
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 1985 305
It might actually be easier to work out the driveshafts with the 90's BE gearbox than the 110's ML, dunno about the spring rates but springs for the 1.9d would probably do the job as they're more-or-less the same block.FarmerPug wrote:That is the business, and it has been installed very tidily.
I still have the DW10 engine and gearbox sitting about but no ECU. I wonder what suspension bits this guy has changed.
The 305 HDi looks very neat, looks like they've transferred all the electrics over, including the ecu, bsi and fuse panels

Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- Doggy
- Mod with a 2.2 HDi, De-Fapped!
- Posts: 10710
- Joined: Mon Oct 13, 2008 11:49 pm
- Location: Northants
Re: 1985 305
In which case, don't faff about....steve_earwig wrote:The 305 HDi looks very neat, looks like they've transferred all the electrics over, including the ecu, bsi and fuse panels
DW12, ML6, 210 bhp remap.

2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 1985 305
I got a spare lawnmower engine 

Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
- 2.0 HDI 110
- Posts: 9656
- Joined: Tue Jun 01, 2010 5:42 pm
- Location: The Countryside, Northern Ireland
- Contact:
Re: 1985 305
I remember last year when stripping the 406 i attempted to take out the full wiring loom, but i can remember it was a bit tricky to get it out around the bulkhead and i gave up on that idea, sort of regretting that now. Has anyone ever took the full loom out of a 406 in one piece.
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 1985 305
Maybe Stealthe? Dunno
Maybe it would be better do do what Sam suggested and use a 1.9's fuel pump and injectors. There was someone that did that on here but I can't think of what to search for to find it

Maybe it would be better do do what Sam suggested and use a 1.9's fuel pump and injectors. There was someone that did that on here but I can't think of what to search for to find it

Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 1985 305
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
- 2.0 HDI 110
- Posts: 9656
- Joined: Tue Jun 01, 2010 5:42 pm
- Location: The Countryside, Northern Ireland
- Contact:
Re: 1985 305
Im going to put the XUD into it, it keeps the car more original and it can still be insured for sensible money, plus its an XUD so it should be tough as nails as long as the coolant system is taken care of.
Myself and my cousin had the engine out of the old van in 2 hours, it came out very handily wiring loom and all, we put it up on the lift, disconnected the pipes, linkages etc, undid the subframe bolts and engine mount bolts with it lowed down and a pallet under the engine, lifted the car back up and had all the important stuff deposited on the pallet, a good coating with foamy degreaser and a blast with the power hose has the engine looking like this:





The seal that goes below the throttle arm on the fuel pump needs to be replaced as its leaking diesel can these be bought separately, this is a bosch pump, it also needs a pipe to replace the rusty coolant pipe near the crankshaft pulley.
Myself and my cousin had the engine out of the old van in 2 hours, it came out very handily wiring loom and all, we put it up on the lift, disconnected the pipes, linkages etc, undid the subframe bolts and engine mount bolts with it lowed down and a pallet under the engine, lifted the car back up and had all the important stuff deposited on the pallet, a good coating with foamy degreaser and a blast with the power hose has the engine looking like this:





The seal that goes below the throttle arm on the fuel pump needs to be replaced as its leaking diesel can these be bought separately, this is a bosch pump, it also needs a pipe to replace the rusty coolant pipe near the crankshaft pulley.
-
- 2.0 HDI 110
- Posts: 9656
- Joined: Tue Jun 01, 2010 5:42 pm
- Location: The Countryside, Northern Ireland
- Contact:
Re: 1985 305
Not much has happened with the 305, I've ordered parts to service the engine and just waiting for them to arrive, but my cousin arrived home today with this:

it might be old but it still attracts the birds:

there is only 70,000 on the engine, under the bonnet the engine bay is in great shape, its a good running engine even with a lucas fuel pump:

Buying 305s seems to be contagious, he ended up buying this from the man where the other one for the donor engine came from, he plans to restore this in the same way as mine, although it might take a bit more welding to get right so far we have removed the bonnet, drivers door, and rear window. They all seem to go in the corner of the tailgate mine included which causes leaks into the cabin, here is the tailgate of the van:



it might be old but it still attracts the birds:

there is only 70,000 on the engine, under the bonnet the engine bay is in great shape, its a good running engine even with a lucas fuel pump:

Buying 305s seems to be contagious, he ended up buying this from the man where the other one for the donor engine came from, he plans to restore this in the same way as mine, although it might take a bit more welding to get right so far we have removed the bonnet, drivers door, and rear window. They all seem to go in the corner of the tailgate mine included which causes leaks into the cabin, here is the tailgate of the van:


- Welly
- The moderator formally known as Welton
- Posts: 15033
- Joined: Tue Jan 10, 2006 12:52 pm
- Location: East Midlandfordshire
Re: 1985 305
You can has your own fleet sir 

Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
Re: 1985 305
Farmer Frank's Friendly Free oh Five Fleet
Stick a bed in the back of them all and hire them out as classic campers to people with more money than sense.
Stick a bed in the back of them all and hire them out as classic campers to people with more money than sense.
2002 HDi 2.2 GTX Estate de-fapped
- Welly
- The moderator formally known as Welton
- Posts: 15033
- Joined: Tue Jan 10, 2006 12:52 pm
- Location: East Midlandfordshire
Re: 1985 305
*ring ring*
"Hello Farmerpug 305 rentals how can we help?"
"I need a B-registered 305 estate, preferably one which used to be petrol powered but has since been converted to old-skool diesel power? and in faded Red. and 5-doors"
*types on keyboard*
"Yes Sir I have one here, £60.00 per day, can I take the long Card Number when you're ready".
"Hello Farmerpug 305 rentals how can we help?"
"I need a B-registered 305 estate, preferably one which used to be petrol powered but has since been converted to old-skool diesel power? and in faded Red. and 5-doors"
*types on keyboard*
"Yes Sir I have one here, £60.00 per day, can I take the long Card Number when you're ready".
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 1985 305
What is this, spot the engine?

Interesting high level air intake...
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
- 2.0 HDI 110
- Posts: 9656
- Joined: Tue Jun 01, 2010 5:42 pm
- Location: The Countryside, Northern Ireland
- Contact:
Re: 1985 305
Its not as faded as it used to be, i did at least give it a wax and polish:

Its still available with petrol power for a limited time only, relive the joys of carburetted engines with pinking, cutting out at junctions and a plethora of other unusual occurrences all of which can be labelled as character.
The high level air intake is common on them all even the petrol, its handy to know its this high when driving through deep water.

Its still available with petrol power for a limited time only, relive the joys of carburetted engines with pinking, cutting out at junctions and a plethora of other unusual occurrences all of which can be labelled as character.
The high level air intake is common on them all even the petrol, its handy to know its this high when driving through deep water.