Heater blower eased.

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
PeterN
3.0 24v
Posts: 1673
Joined: Sun Mar 04, 2012 6:04 pm
Location: Charmouth, Dorset

Heater blower eased.

Post by PeterN »

Never had this problem all the while I was running them but this is one of my 'exes' now belongs to a friend. I have 14.0 v on the two pin plug on the motor but nothing on the control voltage connections. The control unit displays are working as normal but no input it seems to the motor.

I have a spare motor and control panel in the scrap one - but its cold and wet. :frown:

Peter
Post Reply