Sorry to bother you guys again! Im looking to buy some alloys for my 406, I found this list of cars which apparently share the same offset as the 406? Does this mean I can take the alloys from any of these cars and put them straight onto my 6? (dependant on rim size and tyre size).
Make Model Year From Year To
Alfa Romeo Giulia 0 0
Audi 80 0 0
Audi 90 0 0
Audi 100 0 0
Citroen ZX 0 0
Citroen Xsara 0 0
Citroen Xantia 0 0
Citroen BX 0 0
Citroen Saxo 0 0
Citroen Saxo (some models) 0 0
Ford Fiesta 0 0
Ford Mondeo 0 0
Ford Sierra 0 0
Ford Focus 0 0
Ford Orion 0 0
Ford Escort 0 0
Ford Anglia 105E 0 0
Ford Ka 0 0
Ford Scorpio 1994 0
Ford Classic 0 0
Ford Corsair 0 0
Ford Cortina 0 0
Ford Capri 0 0
Ford Puma 0 0
Hillman Avenger-Hunter 0 0
Hillman Minx 0 0
Lotus Super 7 0 0
Lotus Cortina 0 0
Mazda 121 1996 0
Peugeot 406 0 0
Peugeot 205 0 0
Peugeot 306 0 0
Peugeot 405 0 0
Peugeot 206 0 0
Peugeot 307 0 0
Peugeot 106 (4-stud) 0 0
Peugeot 309 0 0
Porsche 924 (4-stud) 0 0
Saab 900 1988 1992
Saab 9000 0 0
Sunbeam 1000 0 0
Sunbeam 1300 0 0
Sunbeam Alpine 0 0
Sunbeam Tiger 0 0
Sunbeam Rapier 0 0
TVR Cerbera 0 0
Volvo 850 0 1993
Offset
Moderator: Moderators
-
old codger
- 2.0 16v
- Posts: 135
- Joined: Sun Jul 29, 2007 9:31 am
- Location: chelmsford essex
Re: Offset
Dont forget the PCD-pitch circle diameter-108 cm-best to try them first for caliper clearance.
-
steve_earwig
- Moderator
- Posts: 19812
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Offset
The bore's pretty important too!
There's plenty of charts like this on the interweb.
According to that one, you're limited to PSA group cars only. And you really do need to check they clear the callipers before parting with any cash.
There's plenty of charts like this on the interweb.
According to that one, you're limited to PSA group cars only. And you really do need to check they clear the callipers before parting with any cash.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
GeordieBoy
- 3.0 24v
- Posts: 779
- Joined: Sat Jan 14, 2006 9:15 pm
- Location: Washington
Re: Offset
Look at this site for Fitement:- http://www.alloywheels.com/
PCD - 4x108
Offset - 15 to 25
Bore - 65.1
Ford have a diff Offset and Bore to the 406, so you may need Spacers and Spigot Rings.
PCD - 4x108
Offset - 15 to 25
Bore - 65.1
Ford have a diff Offset and Bore to the 406, so you may need Spacers and Spigot Rings.
UK Open Drift Championship 2011 Driver #80
Vehicles I own:-
1999 S Peugeot 406 LX 1.9TD (90% WVO, 10% Petrol)
2000 W Ford Transit LWB High Roof 2.5D
1997 R E36 BMW 328i Saloon (Drift/Track Car)
1995 N E36 BMW 328i Saloon (Spare Parts Car)
SOLD --- 2001 Y 406 GTX 2.0 HDi 110bhp
Vehicles I own:-
1999 S Peugeot 406 LX 1.9TD (90% WVO, 10% Petrol)
2000 W Ford Transit LWB High Roof 2.5D
1997 R E36 BMW 328i Saloon (Drift/Track Car)
1995 N E36 BMW 328i Saloon (Spare Parts Car)
SOLD --- 2001 Y 406 GTX 2.0 HDi 110bhp
-
steve_earwig
- Moderator
- Posts: 19812
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Offset
I've heard so many horror stories about spacers I'd be worried about using them.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
old codger
- 2.0 16v
- Posts: 135
- Joined: Sun Jul 29, 2007 9:31 am
- Location: chelmsford essex
Re: Offset
i got a great set of shitron ones off e-bay-little touch with the dremel to remove the 'chevrons' & a repaint-looks fine
5 twin spoke ones-xsara VTS i think
5 twin spoke ones-xsara VTS i think