speedo
Moderator: Moderators
-
andrew1608
- 2.0 16v
- Posts: 156
- Joined: Sun Mar 11, 2007 5:19 pm
speedo
I ham going to be getting my second rapier this week, however the speedo appears to be loose as the needle keeps jumping, does the needle just screw into the back of the speedo.
-
teamster1975
- Site Admin & Mad Biker!
- Posts: 6277
- Joined: Sun Oct 28, 2007 8:07 pm
- Location: Woking, Surrey
Re: speedo
Hi Andrew
The usual fault is either a dry joint on the speedo pcb or the speedo control module which lives behind the glove box.
Have a search, there are loads of posts on this.
The usual fault is either a dry joint on the speedo pcb or the speedo control module which lives behind the glove box.
Have a search, there are loads of posts on this.
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
-
swiss
- 3.0 24v
- Posts: 1000
- Joined: Sat Jun 07, 2008 5:34 pm
- Location: IM IN UR FACEBOOK ADING TEH STRANGES
Re: speedo
Idd, ended up removing and dismantling my dash completely and re-soldering all the joints. Now the clocks work perfecto. No more guess-work when negotiating speed cameras 
The man with no car
"Close the door on your way out, and don't forget your monkey."
"Close the door on your way out, and don't forget your monkey."