ignition key

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
rogerb
Newbie
Posts: 1
Joined: Thu Jun 04, 2009 7:10 pm

ignition key

Post by rogerb »

My heater fan stopped werking and then my ignition key got stuck and I could not turn the engin off has enyone had this problem
jasper5
3.0 24v
Posts: 3689
Joined: Fri Nov 28, 2008 1:30 pm

Re: ignition key

Post by jasper5 »

A few people seem to have had this problem. Do a search and you will find something.

Were you wiggling the key to try to get the heater working again?

A good dose of WD40 inside the keyhole sometimes frees up the key, but I think you may need a new ignition barrel.
406silverhdi
2.0 16v
Posts: 165
Joined: Sat Jul 14, 2007 9:05 am

Re: ignition key

Post by 406silverhdi »

yeah i had this

i replaced the wiring behind the ignition, kept the same keys etc, so dont worry about that

this is a saxo barrel but it looks roughly the same (for illustration purposes) you need to change the wire a and the plastic bit

Image

i did it in about 30 minutes, which included lots of trople checking of everything!

I nicked the wire from a breakers yard
406silverhdi
2.0 16v
Posts: 165
Joined: Sat Jul 14, 2007 9:05 am

Re: ignition key

Post by 406silverhdi »

*the creamy coloured bit insided the barrel comes out of the barrel, allowing you to keep the same key!
coopster
1.8 8v
Posts: 48
Joined: Fri May 29, 2009 3:57 pm
Location: Lincolnshire

Re: ignition key

Post by coopster »

Yup happened to me in the petrol station thought my steering column was on fire the mount of smoke coming out!! the thing is my key never got stuck but i replaced all the wiring barrell etc and were all working fine again now :)

It is just the case of replacing the wire on the back of the barrell!!
Post Reply