Plod's HDi 140
Re: Plod's HDi 140
Had EML light up today
Accelerated hard off the lights and as I backed off it lit up
Was reasonably confident wasn't anything serious so carried on the 2 miles to destination. Had look around engine bay and checked oil and water to no avail.
Drove back from there and light went out after couple of mins.
Was chatting to a guy next door and he has a code reader in his car but I don't know where it plugs in?
Anyone enlighten me?
Accelerated hard off the lights and as I backed off it lit up
Was reasonably confident wasn't anything serious so carried on the 2 miles to destination. Had look around engine bay and checked oil and water to no avail.
Drove back from there and light went out after couple of mins.
Was chatting to a guy next door and he has a code reader in his car but I don't know where it plugs in?
Anyone enlighten me?
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

Re: Plod's HDi 140
There's a blanking plate to the right of the headlamp adjuster. Just lever it out and you'll see the socketplod wrote:Was chatting to a guy next door and he has a code reader in his car but I don't know where it plugs in?
Anyone enlighten me?
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
- Welly
- The moderator formally known as Welton
- Posts: 15033
- Joined: Tue Jan 10, 2006 12:52 pm
- Location: East Midlandfordshire
Re: Plod's HDi 140
Mine used to do that, accelerate hard and the light would come on. We narrowed it down to the throttle position sensor.
I say 'we'..........
I say 'we'..........

Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
Re: Plod's HDi 140
Cheers - off to have a butchers 

1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

Re: Plod's HDi 140
Plugged the code reader in
Said
Faults n/a 9
Faults 1
Pressed read codes and it said
No faults stored in module
Although borrowed my mates reader Instead which was a mac and be said prior it would read petrol codes from 96 but diesel ones only from 04 - although he originally said mine wouldn't have the 16 pin plug but it did
Will have to try the first guys reader instead
Said
Faults n/a 9
Faults 1
Pressed read codes and it said
No faults stored in module
Although borrowed my mates reader Instead which was a mac and be said prior it would read petrol codes from 96 but diesel ones only from 04 - although he originally said mine wouldn't have the 16 pin plug but it did
Will have to try the first guys reader instead
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

Re: Plod's HDi 140
Going to work this morning at 545 the EML came on again, so went to Kendal (in lorry) and when got back
tried the other code reader, and by god, looked a serious bit of kit, but again, it said 1 fault but wouldn't read the code
and said the same, no codes stored in the module
He seemed to think it wasn't the TPS as car runs sweet, and thought if it was the TPS i'd would run rough, as he had a TPS fault on his own car
He suggested, it's more likely a bad connection somewhere
tried the other code reader, and by god, looked a serious bit of kit, but again, it said 1 fault but wouldn't read the code
and said the same, no codes stored in the module
He seemed to think it wasn't the TPS as car runs sweet, and thought if it was the TPS i'd would run rough, as he had a TPS fault on his own car
He suggested, it's more likely a bad connection somewhere
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

Re: Plod's HDi 140
Tried levering that plate out, but it didn't seem to be playing ball, so looked in the fuse box, and there it wasmjb wrote:There's a blanking plate to the right of the headlamp adjuster. Just lever it out and you'll see the socketplod wrote:Was chatting to a guy next door and he has a code reader in his car but I don't know where it plugs in?
Anyone enlighten me?
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

Re: Plod's HDi 140
Signed myself up to service box, and the switches are listed seperately so now I have part numbers : 6552KV and 6552KR i'll ring the stealers tuesdayplod wrote:Was planning on taking the window switches apart in the drivers door, as I can't operate the passenger front, and I can lower the drivers rear but not put it back up.
However my mechanic mate was repairing a 307 the other day and said he bought the whole comparible section from the stealer for £37 IIRC
Don't need the whole section, just the 2 sets of front and rear switches, and was hoping to get back at a reasonable time today as was going to get him to ring the stealer as gets better discount than I can get, but finished later than expected.
Out of curiosity if anyone has access to service box, i'd be interested to know how much they are listed for? ......... please
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

Re: Plod's HDi 140
Been procrastinating just a tad over ringing stealers for prices of switches. Anyway, seen some second hand ones on the bay out of a 99 car, and at the price they were going for £2.50!!!!!! I thought it was worth the risk.plod wrote:Signed myself up to service box, and the switches are listed seperately so now I have part numbers : 6552KV and 6552KR i'll ring the stealers tuesdayplod wrote:Was planning on taking the window switches apart in the drivers door, as I can't operate the passenger front, and I can lower the drivers rear but not put it back up.
However my mechanic mate was repairing a 307 the other day and said he bought the whole comparible section from the stealer for £37 IIRC
Don't need the whole section, just the 2 sets of front and rear switches, and was hoping to get back at a reasonable time today as was going to get him to ring the stealer as gets better discount than I can get, but finished later than expected.
Out of curiosity if anyone has access to service box, i'd be interested to know how much they are listed for? ......... please
So...popped out the old switches, and popped in the other ones, and Voila!!! All the windows work fine for the first time in the 4 years i've owned the car - and all for a measly £2.50 - Bargain!

That reminds me with procrastinating, I heard the procrastination society was about to have their annual general meeting, but have decided to put it off till next year!


1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

- Doggy
- Mod with a 2.2 HDi, De-Fapped!
- Posts: 10710
- Joined: Mon Oct 13, 2008 11:49 pm
- Location: Northants
Re: Plod's HDi 140
Bad?plod wrote:Yeah ok, it was bad
Any more of that & we'll hijack your car and download a 90 bhp ecu file.

2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
Re: Plod's HDi 140


1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

Re: Plod's HDi 140
That reminds me with procrastinating, I heard the procrastination society was about to have their annual general meeting, but have decided to put it off till next year!
Yeah ok, it was bad
[/quote]
someone else that listens to radio 2


someone else that listens to radio 2

Re: Plod's HDi 140
omega wrote:That reminds me with procrastinating, I heard the procrastination society was about to have their annual general meeting, but have decided to put it off till next year!Yeah ok, it was bad
someone else that listens to radio 2

As a driver it's good for the traffic reports
Which were particularly a problem on Thursday when that joke was on as 2 pedestrians were killed on the m6
Don't know what it is but the m6 around Stoke is extremely bad of late
Long delays the last 3 out of 4 times I've been up to Kendal of late
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness

Re: Plod's HDi 140
Urgh... Took me 3 hours to drive 5 miles from Fenton to home in the north of Newcastle that eveningplod wrote:As a driver it's good for the traffic reports
Which were particularly a problem on Thursday when that joke was on as 2 pedestrians were killed on the m6

Nothing local I know of...Don't know what it is but the m6 around Stoke is extremely bad of late
Long delays the last 3 out of 4 times I've been up to Kendal of late
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
Re: Plod's HDi 140
No, just seems to be a lot of accidents of late on the stretch, 15 to 18
The thursday before, there were long delays, and I got off at 15 through keele and cut up to j17 so avoided on way up.
On way back thought it couldn't be too bad, as had been a good few hours, but there was a full size rollon roll off skip and a artic trailer, and they were lifting pallets out of the ditch, so an artic must of come off the motorway, and they had big clean up to do.
Getting a bit paranoid about that stretch now.
Got to go Kendal again tomorrow, but not supposed to be there till 4 o clock, but thinking of going early again.
Might search the kite flying websites later, and see if there is anywhere suitable to go fly my recently acquired 3.5m power kite for a bit - suppose Morecombe beach might be an option
The thursday before, there were long delays, and I got off at 15 through keele and cut up to j17 so avoided on way up.
On way back thought it couldn't be too bad, as had been a good few hours, but there was a full size rollon roll off skip and a artic trailer, and they were lifting pallets out of the ditch, so an artic must of come off the motorway, and they had big clean up to do.
Getting a bit paranoid about that stretch now.
Got to go Kendal again tomorrow, but not supposed to be there till 4 o clock, but thinking of going early again.
Might search the kite flying websites later, and see if there is anywhere suitable to go fly my recently acquired 3.5m power kite for a bit - suppose Morecombe beach might be an option
1999 D8.5 HDi GLX - Sold 
2007 Mondingo Zetec - I seek forgiveness
Bring back my 406

2007 Mondingo Zetec - I seek forgiveness
