WANTED: 406 16" alloy wheels / other stuff

[OdinEidolon]

Hi all!
WHEELS
I'm in the need of 4 x 16" 406 alloy wheels.
Preferably Tacoma, Hoggar, Nimrod, Vulcan, other (in this order). With or without tyres.
Non-original wheels are fine as long as they look good (pics please) and have 15<ET<25.

I do not care how much they are used as long as they do not need to be rectified, of course I'll pay less for a set of scratched wheels.

The problem is that I'm in Italy, but I'm ready to pay 260£ for a set of Tacoma or Hoggars in great conditions shipped.
I do not know if this is enough/too much, judging from ebay UK wheel there are pretty cheap.

If really cheap I may consider 15" wheels too.

OTHER STUFF
- Estate sunblind clips (8748.H5)
- Front splitter
- External motorized mirrors
- Gear knob (possibly leather: 2403.P4)
- Leather steering wheel (to fit the car in signature)
- strut brace
- lateral saloon sunblind
- heated seats switches
- heated, motorized and leather seats with memory (guess shipping would be too much on this one eh?)
- saloon boot liner

Thanks in advance!

[plod]

Have you tried Ade1122 on the coupe club???

[OdinEidolon]

Have you tried Ade1122 on the coupe club???

Yep, ha can provide me with something, but I want to look around a bit before going that route, to find something possibly cheaper.

[highlander]

If you get stuck and want a set of 15" wheels, I have a set that was on my old saloon - they're not perfect (some kerbing and a couple of nasty deep scratches) but they will fit a 406 just fine. They're actually off a 307, so the offset is slightly out - the wheels sit a little bit inside the arches - but there's no rubbing, and they will clear the basic Lucas calipers.

I'd be looking for around £80 plus shipping. There are no tyres on 'em.

[OdinEidolon]

If you get stuck and want a set of 15" wheels, I have a set that was on my old saloon - they're not perfect (some kerbing and a couple of nasty deep scratches) but they will fit a 406 just fine. They're actually off a 307, so the offset is slightly out - the wheels sit a little bit inside the arches - but there's no rubbing, and they will clear the basic Lucas calipers.

I'd be looking for around £80 plus shipping. There are no tyres on 'em.

You got a pic of them and an idea of how much shipping would be? 307 ET should be around 28 right?

[highlander]

Here they are, whilst on my old car:






These were taken the morning the car was scrapped, so no more kerbing has taken place since then. The tyres were removed by the scrappy, and they're currently in black bin bags in the boot of my Coupe.

I don't know what the offset of these wheels actually is; I'll need to check to see if it's stamped on them.

No idea about shipping costs; I've never shipped anything bigger than a normal envelope abroad before.

[OdinEidolon]

Here they are, whilst on my old car:






These were taken the morning the car was scrapped, so no more kerbing has taken place since then. The tyres were removed by the scrappy, and they're currently in black bin bags in the boot of my Coupe.

I don't know what the offset of these wheels actually is; I'll need to check to see if it's stamped on them.

No idea about shipping costs; I've never shipped anything bigger than a normal envelope abroad before.

I was offered hoggars for 290£ shipped by ade, if I manage to get in that shipping costs somemore parts it could be the way to go. However if you want to give an eye on shipping costs of yours it can't hurt to have more possibilities!

[OdinEidolon]

bump.