new owner needs advice
Moderator: Moderators
new owner needs advice
hi guys just bought an s reg 1.9td 406 estate in immaculte nick with 205,000 on the clock but with 105,000 engine and gearbox fitted.just afew niggles need sorting though.firstly,how difficult is it to replace the tacho bulb ?and is it a common fault that the diesel filler cap cover doen't open when the lever is pulled ?i've also noticed the tacho sometimes drops and then springs back up.any advice would be greatly appreciated as have spent all my savings on this beauty ! any ideas how many mpg it should be getting ? cheers guys {its taken me half an hour to 2 finger type this ,sad or what !] /posting.php?mode=post&f=17#
-
- Site Admin & Mad Biker!
- Posts: 6277
- Joined: Sun Oct 28, 2007 8:07 pm
- Location: Woking, Surrey
Re: new owner needs advice
Welcome on in Tristan!
The dash bulbs are fairly straightforward, you have to remove the dash surround (couple of torx screws in the top & it pulls out), then 4 torx screws to remove cluster. The bulbs are the little twist in jobbies.
With regards the filler flap: see here!
The dash bulbs are fairly straightforward, you have to remove the dash surround (couple of torx screws in the top & it pulls out), then 4 torx screws to remove cluster. The bulbs are the little twist in jobbies.
With regards the filler flap: see here!
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there

1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
- Captain Jack
- 3.0 24v
- Posts: 3820
- Joined: Sun Aug 07, 2005 11:26 am
- Location: Langford, Somerset
Re: new owner needs advice
And the tacho drops could be down to dry joints. While you have the speedo unit out, run a soldering iron over the connections
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp
)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp

2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium