I have fitted electric black leather seats in my car, replacing the electric cloth seats.
They are from a D8 (1998 s reg) estate and have gone into my D9 (2000 x reg).
Everything fits/bolts in the same; but the electric seat wiring is different with some different connectors.
So my question is; does anyone know how to rewire them so I can function the seats properly?
May I suggest getting hold of the Haynes wiring diagrams for both cars? It'll tell you things like how many pins and what colour connectors are used on the various bits, then in theory you could just match the appropriate functions.
The man with no car
"Close the door on your way out, and don't forget your monkey."
I was playing with this on my coupe at the weekend, just gone the other way and done D9 seats in a D8, i'll find up my HBOL as the D8 one definately has the schematics in it, including heated seats, you will find the cable for the pretensioners are different but there is an easy fix by swapping the pretensioner from your old seats onto your new ones, should be a 13mm socket and then unclip the cable, easiest way to do it.
I think the main issue you might find is your new seats will not have side airbags so you will probably get the constant light on the dash...
1997 2.1 TD Exec (Sold)
1997 3.0 V6 Coupe S (Sold)
2001 406 HDi 110 GTX (Sold)
2002 406 Coupe HDi SE (RIP)
2003 406 Estate HDi 2.2 SE (Sold)
2003 406 Coupe HDi SE (To be sold)
2001 406 Coupe 3.0 V6 SE
2003 406 2.2 HDi SE