pp2000 install problems
Moderator: Moderators
pp2000 install problems
So I've installed PP2000 on my laptop but I'm struggling with activation of version PP2000-25.01
Can anybody help?
Can anybody help?
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
2003 2.2 HDI SE
Re: pp2000 install problems
My bad, I was typing the version number in wrong!
Too late to test on car now but I'm off work tomorrow so I'll have a play with it then
Too late to test on car now but I'm off work tomorrow so I'll have a play with it then
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
2003 2.2 HDI SE
- Doggy
- Mod with a 2.2 HDi, De-Fapped!
- Posts: 10710
- Joined: Mon Oct 13, 2008 11:49 pm
- Location: Northants
Re: pp2000 install problems
Luck....
If it works straight out the box, please tell us how it's done.
(Nearly everybody has a battle of some sort).
If it works straight out the box, please tell us how it's done.
(Nearly everybody has a battle of some sort).

2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
Re: pp2000 install problems
I've installed it 8 times in the last week (due to a hardware problem in the end) so I've got the process pretty much spot on 


2002 V6 SE Coupé (210bhp) - (Aegean Blue)
2002 D9 2.2 HDi Exec Estate - Samarkand Blue
PM me for PP2000 diagnostics around Surrey
Re: pp2000 install problems
So....all up and running and just spent 10 minutes clearing all the fault codes and re-ran the global test, the results are;
Engine ECU - Permanent fault - pre/post heating relay circuit - relay opened
Engine ECU - Permanent fault - pre/post heating relay circuit - relay stuck
Diesel fuel additive control unit - intermittent fault - additive pump
A couple of others relating to a missing cd changer and the sat nav cd reader but nothing else
Anything to worry about?
I did clear a fault relating to boost pressure but I'll investigate that if it comes back, I'll probably run it again at the weekend and see if any new entries have hit the charts
Engine ECU - Permanent fault - pre/post heating relay circuit - relay opened
Engine ECU - Permanent fault - pre/post heating relay circuit - relay stuck
Diesel fuel additive control unit - intermittent fault - additive pump
A couple of others relating to a missing cd changer and the sat nav cd reader but nothing else
Anything to worry about?
I did clear a fault relating to boost pressure but I'll investigate that if it comes back, I'll probably run it again at the weekend and see if any new entries have hit the charts
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
2003 2.2 HDI SE
- rwb
- 3.0 24v
- Posts: 2612
- Joined: Thu Jun 17, 2010 7:53 pm
- Location: Yorkshireman exiled in Salop
- Contact:
Re: pp2000 install problems
Very common: either you need new glow plugs or a new glow plug relay.
The DW12s seem to eat glow plugs, presumably because they're used when regenerating.
Fuel additive is the DPF stuff, so that probably should have been mapped out.
If in PP2000 you un-install the CD changer then that should deal with that.
The DW12s seem to eat glow plugs, presumably because they're used when regenerating.
Fuel additive is the DPF stuff, so that probably should have been mapped out.
If in PP2000 you un-install the CD changer then that should deal with that.
Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
Re: pp2000 install problems
Starting ok at the moment so I'll worry about that later, the map is the generic 180 so presumably all cars will have that fault?
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
2003 2.2 HDI SE
- Doggy
- Mod with a 2.2 HDi, De-Fapped!
- Posts: 10710
- Joined: Mon Oct 13, 2008 11:49 pm
- Location: Northants
Re: pp2000 install problems
Nearly every HDi I've plugged mine into shows a pre-post heating error of some sort. I just ignore it.
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
Re: pp2000 install problems
That sounds like a plan, when it starts to struggle to fire I'll look at it.
BTW when running planet I left it with ignition on, can it be run with engine running?
I was faffing about a fair bit and was wondering how you'd manage with cars with a poor battery?
BTW when running planet I left it with ignition on, can it be run with engine running?
I was faffing about a fair bit and was wondering how you'd manage with cars with a poor battery?
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
2003 2.2 HDI SE
- Doggy
- Mod with a 2.2 HDi, De-Fapped!
- Posts: 10710
- Joined: Mon Oct 13, 2008 11:49 pm
- Location: Northants
Re: pp2000 install problems
You have to have the engine running for the parameter measurements, so yes, no problem.
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)