once again hard to start:(
Moderator: Moderators
-
modified406
- 2.0 Turbo
- Posts: 273
- Joined: Wed Jun 30, 2010 12:34 pm
- Location: glasgow
Re: once again hard to start:(
the engine doesnt stop when am drivin it mate its just hard to start but with a bump start it would start problem
-
Doggy
- Mod with a 2.2 HDi, De-Fapped!
- Posts: 10710
- Joined: Mon Oct 13, 2008 11:49 pm
- Location: Northants
Re: once again hard to start:(
Sorry, I hadn't read all of your post.
Thinking about it, the lift pump should also run while the starter's turning, (& you probably won't be able to hear that), so it might still be worth trying the test lamp
Thinking about it, the lift pump should also run while the starter's turning, (& you probably won't be able to hear that), so it might still be worth trying the test lamp
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
-
modified406
- 2.0 Turbo
- Posts: 273
- Joined: Wed Jun 30, 2010 12:34 pm
- Location: glasgow
Re: once again hard to start:(
will try that mate
going to check my fuel filter to see if its dirty or blocked somethings tellin me my tank might be dirty and could be blocking pipes or even the filter on the bottom of the lift pump i could be wrong but its worth a try
going to check my fuel filter to see if its dirty or blocked somethings tellin me my tank might be dirty and could be blocking pipes or even the filter on the bottom of the lift pump i could be wrong but its worth a try
-
modified406
- 2.0 Turbo
- Posts: 273
- Joined: Wed Jun 30, 2010 12:34 pm
- Location: glasgow
Re: once again hard to start:(
well i didnt want to post this yesterday just incase it was another failed attempt but i have now fixed the starting problem after yous guys gave me an idea about blockage i took off the top of the filter housing and blew through the pipes and turned out there was an airlock in the pipes so after a good run last night and today it started no problem