several months ago I asked the question how could I remove this and was pleased to recieve the surgestion of useing a thin bladed screwdriver and levering it out I have tried this seveal times but have not been successful all that happens is the face of the unit pops off but I am still unable to get to the bulb. Surley there must be a different way to get the unit out.Any other ideas please would be welcome
If it's wedged in there that tightly you'll have to remove the dash surround & push it out from the back.
I'm surprised, it's not a very tight fit!
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
several months ago I asked the question how could I remove this and was pleased to recieve the surgestion of useing a thin bladed screwdriver and levering it out I have tried this seveal times but have not been successful all that happens is the face of the unit pops off but I am still unable to get to the bulb. Surley there must be a different way to get the unit out.Any other ideas please would be welcome 