Glow plug relay renewal

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
User avatar
karlosantana
1.8 8v
Posts: 30
Joined: Wed Oct 13, 2010 9:01 am
Location: Swansea, Wales

Glow plug relay renewal

Post by karlosantana »

You will need
Image
Image
It's fairly simple, this needs doing if your getting a long start before the glow plug light goes off, or in my case was going off too soon.
It's located on the right hand side on the 1.9dt sorry dont know where it is on other models. Its under a plack plate like below
Image
Now you'll see a 10mm bolt on the left handside of that photo, remove it catch the bolt!
You'll then have this!
Image
Simply replace it, it has two nuts, one 8mm the other 10mm undo them unplug the plug. Fitting is reverse of removal, job jobbed :D
Cheers
Kyle
User avatar
karlosantana
1.8 8v
Posts: 30
Joined: Wed Oct 13, 2010 9:01 am
Location: Swansea, Wales

Re: Glow plug relay renewal

Post by karlosantana »

Again is it possible we can have this put on the Knowledge basey thingy please?
Cheers
Kyle
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Glow plug relay renewal

Post by steve_earwig »

Cheers muchly, also copied to the old KB :cheesy:

I hope Santa brings you some bright new shiny tools :wink:
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
Post Reply