Black lower trim

[Gary406]

thats a shame gary, but on the issue of screwing back in the handles, use some pink grip in addition to the screws and washers, it means they will be bonded onto the door card very tight, the screws just hold it in place, but it takes the strain off them.

no need to use pink grip mate, the handle gets bolted to the door anyway when the door card goes back onto door,
2 bolts hold each handle on the metal brackets on the doors

[FarmerPug]

your method of attaching the handles sounds good, show pics of them put on so i can see how you did it.

[Gary406]

this is the top of the handle on the inside ,,,
2 screws 2 washers just screw them into the tube thats allready there. 1st cut off the plastic weld
i will post drivers side door pic 2moro when ive fixed it back on

[Gary406]

finished door cards now all back in car,

[FarmerPug]

i must say its looking very plush in there now, a drastic improvement. Well done.

[Gary406]

back to the black trim. i've been thinking of doing the roof.

re-trimming it with the same cloth as i've used for the door cards.

also the parcel shelf.

and trim the a, b, c pillar in faux leather like bigcheif did.

could be a job to do in the warmer months coming up

[FarmerPug]

faux leather or alacanta trimming sounds interesting.

[Gary406]

yes bigcheif covered his pillar trim with black since pug didnt make black pillar trim