Replacement Key Fob Button

[adam03031980]

Hi All

Big middle button has disentegrated on my key fob everything works fine but does anybody know if you can get replacements or would i have to get a new case for it

[lozz]

Hi All

Big middle button has disentegrated on my key fob everything works fine but does anybody know if you can get replacements or would i have to get a new case for it

They sell the buttons on ebay mate

see link

http://cgi.ebay.co.uk/NEW-PEUGEOT-106-2 ... 3cb2fe7c56

[adam03031980]

I have the normal 406 key which i imagine everyone has but they have flip ones like as below but will the old bits fit out of my old key into the new one like the circuit board:-

http://cgi.ebay.co.uk/Peugeot-2-Button- ... 230dbf0e7d

[Gary406]

ye if its same key as your link the circuit board will fit, and then you need to get the blade cut which wont be cheap . car keys are usually £20+ to cut

[adam03031980]

Wow thats a lot only bit gone is the rubber no my key looks like this http://cgi.ebay.co.uk/Peugeot-106-306-4 ... 45f84a6a56

[GeordieBoy]

If its just the case you need, then no need to get a key cut. Just swap the insides inc key to the new key fob.

[adam03031980]

Seen this for a 306 http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... ink:top:en

looks the same but is it thats what im a bit concerned about

[xero01uk]

Wow thats a lot only bit gone is the rubber no my key looks like this http://cgi.ebay.co.uk/Peugeot-106-306-4 ... 45f84a6a56

my alarm button rubbr thing fell off a few weeks ago, so i got a small piece of paper shoved it in the hole and put soe selotape over it and it works a treat... i know its not the best fix but it works

im not paying the stealers price for a new key unit

[lozz]

The rubber button as fell inside on my key fob,
anyone know whats sposed to hold the button in place?

ive just put tape over it for now still works but iwant to try sort it.
as anyone got any pics of the 2 button fobs in peices so ican work out how too sort it,

thanks,

[FarmerPug]

i bought a flip key when i got my car, put the circuit into it, filed the end of my key to fit into it, and it worked, but dont buy it, them flip keys stick out way way too much when in the barrel and i found the driving position i had to adapt because of the key very uncomfortable, so the flip keys have that problem, they also feel very weak during the turning of the barrel like they would break when starting the car.