Stalk blanking plate

Just your normal general chatting in here..

Moderator: Moderators

Post Reply
User avatar
Coxy
1.8 16v
Posts: 73
Joined: Thu Mar 03, 2011 5:27 pm
Location: Windsor, UK

Stalk blanking plate

Post by Coxy »

Read mention of a little part to fill the hole when removing the stereo remote stalk. Anyone know where I could buy such a thing?
Current vehicles: 1997 Peugeot 406 V6 3.0 & 2009 Kawasaki ZX-10R Ninja.

Stelvio Pass onboard my Triumph Daytona 675:
Part 1, Part 2, Part 3, Part 4, Part 5.
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Stalk blanking plate

Post by steve_earwig »

Looks like it's #7 on the diagram here:
Image

I think you'd have to get lucky in the breakers, or the dealers still seem to do them:

4131G8 MOULDING 4.31 GBP (for a tiny bit of plastic? :roll: )
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
Coxy
1.8 16v
Posts: 73
Joined: Thu Mar 03, 2011 5:27 pm
Location: Windsor, UK

Re: Stalk blanking plate

Post by Coxy »

I think I may have to fork out at the dealers, stupid I know but I'm OCD about this kinda thing, the hole there would just niggle at me.
Current vehicles: 1997 Peugeot 406 V6 3.0 & 2009 Kawasaki ZX-10R Ninja.

Stelvio Pass onboard my Triumph Daytona 675:
Part 1, Part 2, Part 3, Part 4, Part 5.
FarmerPug
2.0 HDI 110
Posts: 9656
Joined: Tue Jun 01, 2010 5:42 pm
Location: The Countryside, Northern Ireland
Contact:

Re: Stalk blanking plate

Post by FarmerPug »

it would niggle me also.
User avatar
lozz
3.0 24v
Posts: 11908
Joined: Thu Oct 07, 2010 10:18 pm
Location: where-ever

Re: Stalk blanking plate

Post by lozz »

Get anice peice of plastic similar colour and make one,
Imade a blanking plate when iremoved the stalk when ihad a 306,
ilooked for ages to find one which made me go for the Blue peter route :oops:
FarmerPug
2.0 HDI 110
Posts: 9656
Joined: Tue Jun 01, 2010 5:42 pm
Location: The Countryside, Northern Ireland
Contact:

Re: Stalk blanking plate

Post by FarmerPug »

A few possibilities:
- use some expanding foam, put some in the hole, let it dry, sand it down and paint the area black.
- Tape over the hole, then put some fibreglass filler on the other side.
-
Post Reply