WANTED asap, towbar slotted nuts

[Floodys]

Just got my towbar delivered but i think because my car hasnt ever had a towbar the holes are in the body for the slotted nuts but none there thus i need some asap, if anyone has them or knows where i can get them asap??? I'll try servicebox now!

[Floodys]

Sorted now! Drilled holes to get 17mm nuts in rail then bodysealed and grometted holes back up! Perfecto!

[stealthe]

Any chance of putting pics up, or a description of what you did? I have the same issue with a friends car.

stealthe

[Floodys]

No pics as its all fitted now and under car but basically the towbar i had offered up to existing holes, the 2 front "taped" over holes were no worries, un-taped and bolted that bit straight on, the 2 on each side where i had the problem lined up fine but obv couldnt get a nut in the boxed chasis rail so i drilled holes in the bottom of box in line with bolt holes on side, i then made drilled holes larger with a cone cutter drill bit so i could get a 17mm nut in it, i then slid nut up whilst poking bolt through towbar bracket and chasis then with bit of fiddling managed to get nut started on bolt, repeat 4 times then all i did was to put rubber gromet/plugs in holes i drilled plus some underseal and job done! Hope tha helps!!

[stealthe]

Makes perfect sense! Thanks!

stealthe