d8 exec saloon 2.0 petrol breaking
Moderator: Moderators
Re: d8 exec saloon 2.0 petrol breaking
If the parcel shelf is in grey and same as a D9 shelf and has the blind and storage box I would be interested if you still have it.
53' 406 2.2 HDi SE saloon - Samarkan Blue
Coupe strut brace-BMC CDA-Bosch Aero wipers-2.5'' T304 fap back exhaust-de-cat/dpf internals-EGR blank-180bhp remap-Ultra Racing rear lower brace-Poly engine mount- Brembo calipers-braided hoses-LEDs-55w Xenon 6k kit-nightbreaker plus main+fogs-LED sidelights
Coupe strut brace-BMC CDA-Bosch Aero wipers-2.5'' T304 fap back exhaust-de-cat/dpf internals-EGR blank-180bhp remap-Ultra Racing rear lower brace-Poly engine mount- Brembo calipers-braided hoses-LEDs-55w Xenon 6k kit-nightbreaker plus main+fogs-LED sidelights
Re: d8 exec saloon 2.0 petrol breaking
Hi, I'm after some wheel arch liners:
Front drivers side, the front and middle section.
Front passenger side, rear section.
Do you have these and and they intact?
Front drivers side, the front and middle section.
Front passenger side, rear section.
Do you have these and and they intact?
'97 Peugeot 406 1.9 TD, 316k, down for full rebuild with custom rods, TD04 and a stack of welding.
'95 Peugeot 405 1.6 GLX with XU10J4RS conversion @ 195bhp.
'05 RenaultSport Clio 182 Cup, 111k.
'95 Peugeot 405 1.6 GLX with XU10J4RS conversion @ 195bhp.
'05 RenaultSport Clio 182 Cup, 111k.
Re: d8 exec saloon 2.0 petrol breaking
yes got all these,they are still on the car would you be collecting as packing might not be easyally406 wrote:Hi, I'm after some wheel arch liners:
Front drivers side, the front and middle section.
Front passenger side, rear section.
Do you have these and and they intact?
Re: d8 exec saloon 2.0 petrol breaking
got the blind,box but its in tan and i think d8/9 are diffrent and also they are a pig to get out406loon wrote:If the parcel shelf is in grey and same as a D9 shelf and has the blind and storage box I would be interested if you still have it.
Re: d8 exec saloon 2.0 petrol breaking
omega wrote:yes got all these,they are still on the car would you be collecting as packing might not be easyally406 wrote:Hi, I'm after some wheel arch liners:
Front drivers side, the front and middle section.
Front passenger side, rear section.
Do you have these and and they intact?
I'd need them posted mate!
'97 Peugeot 406 1.9 TD, 316k, down for full rebuild with custom rods, TD04 and a stack of welding.
'95 Peugeot 405 1.6 GLX with XU10J4RS conversion @ 195bhp.
'05 RenaultSport Clio 182 Cup, 111k.
'95 Peugeot 405 1.6 GLX with XU10J4RS conversion @ 195bhp.
'05 RenaultSport Clio 182 Cup, 111k.
Re: d8 exec saloon 2.0 petrol breaking
well i was going to say if you come and take them off you can have them for freeally406 wrote:omega wrote:yes got all these,they are still on the car would you be collecting as packing might not be easyally406 wrote:Hi, I'm after some wheel arch liners:
Front drivers side, the front and middle section.
Front passenger side, rear section.
Do you have these and and they intact?
I'd need them posted mate!
but wrapping and post will be a nightmare.
Re: d8 exec saloon 2.0 petrol breaking
Hi Omega, I have managed to source the main arch liner piece, but I still need the small bit that fits at the very front under the bumper on the driver's side. I think it would be ok to stick this in a jiffy bag and is easy enough to remove. Would you be able to send me this?omega wrote:well i was going to say if you come and take them off you can have them for freeally406 wrote:omega wrote:
yes got all these,they are still on the car would you be collecting as packing might not be easy
I'd need them posted mate!
but wrapping and post will be a nightmare.
'97 Peugeot 406 1.9 TD, 316k, down for full rebuild with custom rods, TD04 and a stack of welding.
'95 Peugeot 405 1.6 GLX with XU10J4RS conversion @ 195bhp.
'05 RenaultSport Clio 182 Cup, 111k.
'95 Peugeot 405 1.6 GLX with XU10J4RS conversion @ 195bhp.
'05 RenaultSport Clio 182 Cup, 111k.