bitch!

Shocks, springs, anything to do with the running gear

Moderator: Moderators

Post Reply
poddack
2.0 Turbo
Posts: 382
Joined: Mon Jul 14, 2008 10:33 pm
Location: Bristol

bitch!

Post by poddack »

She's had me on my back again this morning to check why my handbrake is rubbish, cables are a bit worn through, shoes were fine, changed the discs and pads because one side was more worn than the other.
OOH! One of my rear brake calipers is siezed off. That would do it!

Any way a bit of beating and lots of WD40 and I have effected a temporary repair to my rear caliper until I replace them.
406 estate, 2.1TD, I fixed her, then part exchanged her for a Mercedes E300TD Avantgarde Estate.
Hmmmm, straight 6 goodness!
poddack
2.0 Turbo
Posts: 382
Joined: Mon Jul 14, 2008 10:33 pm
Location: Bristol

Re: bitch!

Post by poddack »

slider bolts for repairing my calipers were £29 for the pair from biggred, much better than £49 a side from the main stealer.
406 estate, 2.1TD, I fixed her, then part exchanged her for a Mercedes E300TD Avantgarde Estate.
Hmmmm, straight 6 goodness!
Parm
1.8 16v
Posts: 58
Joined: Sun Jul 24, 2011 3:30 pm
Location: Wolverhampton

Re: bitch!

Post by Parm »

All sorted now? :)
Peugeot 406 2.2Hdi Coupe '02' Plate
Metallic Black(silver & black edition)
Manual, Rear Tints.
poddack
2.0 Turbo
Posts: 382
Joined: Mon Jul 14, 2008 10:33 pm
Location: Bristol

Re: bitch!

Post by poddack »

the bits come tomorrow, so I'll be on my back again tomorrow night
406 estate, 2.1TD, I fixed her, then part exchanged her for a Mercedes E300TD Avantgarde Estate.
Hmmmm, straight 6 goodness!
robb
2.0 Turbo
Posts: 399
Joined: Tue Jul 28, 2009 3:27 pm
Location: lancashire

Re: bitch!

Post by robb »

poddack wrote: I'll be on my back again tomorrow night
........Ooooh Matron
1997 406 2.0 petrol estate lx..D8.............OH dear where does this nut go?
Parm
1.8 16v
Posts: 58
Joined: Sun Jul 24, 2011 3:30 pm
Location: Wolverhampton

Re: bitch!

Post by Parm »

LOL so are these the slider bolts for the caliper? So expensive :shock:
Peugeot 406 2.2Hdi Coupe '02' Plate
Metallic Black(silver & black edition)
Manual, Rear Tints.
poddack
2.0 Turbo
Posts: 382
Joined: Mon Jul 14, 2008 10:33 pm
Location: Bristol

Re: bitch!

Post by poddack »

SORTED! Took me from 6.50 to about 9.15 tonight to do it with a small desk light.
Two new handbrake cables
Two new caliper slider bolts
And a quick adjustment.
Now for some beer!
406 estate, 2.1TD, I fixed her, then part exchanged her for a Mercedes E300TD Avantgarde Estate.
Hmmmm, straight 6 goodness!
poddack
2.0 Turbo
Posts: 382
Joined: Mon Jul 14, 2008 10:33 pm
Location: Bristol

Re: bitch!

Post by poddack »

Back to my mot garage for a free handbrake adjustment (with all it's new bits). Feels much better, but they've only managed to get 21% out of it!
Is this the rubbish Peugeot handbrake I'm expecting?
406 estate, 2.1TD, I fixed her, then part exchanged her for a Mercedes E300TD Avantgarde Estate.
Hmmmm, straight 6 goodness!
User avatar
steve_earwig
Moderator
Posts: 19812
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: bitch!

Post by steve_earwig »

Yep, they're crap. It's not much of a surprise 'cos they're the same size shoes as fitted to the rear end of a Fiat Uno :roll: The best you can do with them is give the shoes & the insides of the disks a scuff with emery/sand/glass paper and adjust all play out of them before the test, then for the rest of the year leave it in gear.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
plod
3.0 24v
Posts: 2725
Joined: Sun Jun 29, 2008 9:42 pm
Location: Hinckley

Re: bitch!

Post by plod »

My parking space is on a slope, and a hole has developed in the surface
Knowing how bad the handbrake is on the 406, i've deliberately not filled it in, and just drop a wheel into it when I park up :cheesy:
1999 D8.5 HDi GLX - Sold :(

2007 Mondingo Zetec - I seek forgiveness :( Bring back my 406
Post Reply