Air Leak / Fuel Filter Housing
Moderator: Moderators
-
- 2.0 Turbo
- Posts: 442
- Joined: Wed Nov 08, 2006 8:53 pm
- Location: deeping st james
Air Leak / Fuel Filter Housing
Well after replacing bits and doing a leak off test have still not managed to cure the hard cold start, there is air bubbles on the inlet side pipe of the fuel filter housing could this be a housing issue its a hdi 90 with a siemens fuel filter housing with 2 ports and a sensor on top. I recently but in a new fuel filter and seal but the air bubbles were there before that.
- rwb
- 3.0 24v
- Posts: 2612
- Joined: Thu Jun 17, 2010 7:53 pm
- Location: Yorkshireman exiled in Salop
- Contact:
Re: Air Leak / Fuel Filter Housing
I've had those bubbles for years.
Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
Re: Air Leak / Fuel Filter Housing
did you look at all your fuel lines for leaks , where air is leaking in fuel will more than likely be leaking out. at the very high pressure the fuel is pumped to, I wouldn't think air bubbles would make any difference . get pp2000 to read your fuel pressure .
-
- 2.0 Turbo
- Posts: 442
- Joined: Wed Nov 08, 2006 8:53 pm
- Location: deeping st james
Re: Air Leak / Fuel Filter Housing
Yeah they all look dry it seems to be in the pipe from the primer to the fuel filter housing but not in the other pipes, diagnostics isnt telling me anything, also want to know how to check the bar pressure from the HP Pump when cranking the engine if anyone knows
-
- 2.0 16v
- Posts: 137
- Joined: Sat Mar 26, 2011 11:30 pm
- Location: Ireland
Re: Air Leak / Fuel Filter Housing
I notice maybe one or two small bubbles in the same place, but when I squeeze the primer bulb it pushes a significant amount of air through - I need to squeeze it 4 or 5 times before it stops. I don't see any obvious leaks but I don't know where to look really - could it be anywhere back to the tank?
I'm having the same problem with cold starts.
I'm having the same problem with cold starts.
2002 2.0 HDi 90 Rapier saloon (for sale)
Re: Air Leak / Fuel Filter Housing
Are u sure ur starter motors turning over quick enough? My car was having cold start probs & mechanic said it was 99% starter. Replaced it (£65) and starts within 1 sec o turning over
-
- 2.0 16v
- Posts: 137
- Joined: Sat Mar 26, 2011 11:30 pm
- Location: Ireland
Re: Air Leak / Fuel Filter Housing
My mechanic suggested that too, but how come it starts fine on warm days?
2002 2.0 HDi 90 Rapier saloon (for sale)
-
- 2.0 Turbo
- Posts: 442
- Joined: Wed Nov 08, 2006 8:53 pm
- Location: deeping st james
Re: Air Leak / Fuel Filter Housing
Is there anyway to fix the solution instead of a new starter would cleaning all the connections and the copper greasing work i have the same issue starter has started to sound pretty sluggish or maybe new bushes
-
- 2.0 16v
- Posts: 137
- Joined: Sat Mar 26, 2011 11:30 pm
- Location: Ireland
Re: Air Leak / Fuel Filter Housing
Starters can be "reconditioned" like alternators, haven't looked into it myself yet.
2002 2.0 HDi 90 Rapier saloon (for sale)
Re: Air Leak / Fuel Filter Housing
Cos in warmer weather fuel combustion behaves differently. When i turn key its really an eye opener to see how much diff,a new starter makes. Starts within 1st cple of cycles. When my old starter was turnIng over the engine i'd say i could count about 3cycles of engine every second:quite slow really,for cold weather.
Im amazed at how many folk will post a thread askin about air-leaks,glow-plugs,weak-battery,dying fuel pump,fuel-filter,etc etc etc,when in fact,their starter was gettin old/lazy!
My starter was £60 from motor factors-"sovereign" brand
Let me know how you get on
Im amazed at how many folk will post a thread askin about air-leaks,glow-plugs,weak-battery,dying fuel pump,fuel-filter,etc etc etc,when in fact,their starter was gettin old/lazy!
My starter was £60 from motor factors-"sovereign" brand
Let me know how you get on