406 ANGEL EYES
Moderator: Moderators
406 ANGEL EYES
are ANGEL EYES avalible for the 406??
it seems they do for every outher car..... including my mums blokes shitty old v.w camper!!!
if not... Y NOT??? lol
what headlight conversions ARE avalible??
many thanks peeps
it seems they do for every outher car..... including my mums blokes shitty old v.w camper!!!
if not... Y NOT??? lol
what headlight conversions ARE avalible??
many thanks peeps
-
- 1.8 16v
- Posts: 98
- Joined: Tue Nov 21, 2006 9:30 am
- Location: The Wirral
this is a bit off topic but WTF is that exhaust doing in the front bumper of that 406 in your sig :/
chavtastic yo!
but talking of chav tastic i just bought this twin exit exhaust for my cab (picking it up after chrimbo)

along with angel eyes and a smooth front grill
and have my front mount intercooler pretty visable now through the new bumper
i really need to get some pics up
rest assured i will never have rear lights like that though, i actually quite like the standard ones

chavtastic yo!
but talking of chav tastic i just bought this twin exit exhaust for my cab (picking it up after chrimbo)

along with angel eyes and a smooth front grill
and have my front mount intercooler pretty visable now through the new bumper
i really need to get some pics up

rest assured i will never have rear lights like that though, i actually quite like the standard ones


1996 306cab with a few mods
1997 Mercedes C230 Kompressor sport
1997 Mercedes C230 Kompressor sport
Malachy wrote:this is a bit off topic but WTF is that exhaust doing in the front bumper of that 406 in your sig :/
chavtastic yo!
but talking of chav tastic i just bought this twin exit exhaust for my cab (picking it up after chrimbo)
along with angel eyes and a smooth front grill
and have my front mount intercooler pretty visable now through the new bumper
i really need to get some pics up
rest assured i will never have rear lights like that though, i actually quite like the standard ones![]()
Nice Lexus

- niz406
- Admin <BR>Turbo God
- Posts: 1752
- Joined: Sun Sep 11, 2005 1:07 am
- Location: Derbyshire
- Contact:
OMG..... Welton WTFWelton wrote:BMW's aren't badly made
OK soooooooo they are SO badly made with all their plastic push clip retainers holding the entire interior together and their piss poor heating and air con units.... my bro has an E36 and has quite a few electrical problems ! and most of them are common problems ! Peugeot's list of common faults are quite small, its the uncommon ones that people usually get affected by lol
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
my sisters bmw e46 325i is a lot better made than my 406
the heating in it may not be as good, but the a/c is a million times better
and the interior doesnt squeak, rattle or make any french noises
and apart from the airbag light comming on now and again there has been no trouble with it
and the clutch on the bmw i could do in a lunch break, i would be working all day on the 406
the heating in it may not be as good, but the a/c is a million times better
and the interior doesnt squeak, rattle or make any french noises
and apart from the airbag light comming on now and again there has been no trouble with it
and the clutch on the bmw i could do in a lunch break, i would be working all day on the 406
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
- ThePrisoner
- 2.0 Turbo
- Posts: 378
- Joined: Wed Jan 17, 2007 11:09 pm
- Location: Maidstone, Kent
Yeah I am having the same problem too. I have been looking for a set of angel eyes, but it sppear that they dont make them for the 406. Just about every other car has a set available, including old sh*t chav motors like Nova, Escort and other sheds...
It is frustrating, but as soon as someone realises that there is a gap in the market, im sure they will get produced at some point. Just a case of waiting for some, or bodging in a set of 306 ones if you have the heart to take some tools and an anglegrinder to your 406
Pris.
It is frustrating, but as soon as someone realises that there is a gap in the market, im sure they will get produced at some point. Just a case of waiting for some, or bodging in a set of 306 ones if you have the heart to take some tools and an anglegrinder to your 406

Pris.



- Welly
- The moderator formally known as Welton
- Posts: 15033
- Joined: Tue Jan 10, 2006 12:52 pm
- Location: East Midlandfordshire
Notice, if you will, the condensation build up in the right hand clusterSubaru Coloured 306 wrote:

I have noticed (and experienced) this with these aftermarket lexarse lights and angle eyes. They allways mist up, so they are poorly made and the makers don't seem to be able to seal them properly.
Plus, they make your car look like a cheap ebay-tastic mobile.
Incidentally, most 'angle eye' headlamps emit a much worse beam pattern over the standard lenses. They tend to use a projector lens, but there are good projectors (like the Hella 50mm) and there are bad ones.
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work