I've got a goer of a HDI 90 estate with a shagged exhaust (bar back box) and a very good exhaust on a scrap HDI 110 estate (bar back box).
Was hoping to take the good back box off my car and put it on the good exhaust from the 110 car, but the 110 exhaust seems to be three sections with a centre box, whilst my 90 exhaust only has two sections and no centre box - would this be a feasible option?
Other than that will be changing over wing, front doors, alloys, bonnet and 7-seat conversion to make my car look top dollar! Just changed the font drop links, both track rod ends, new n/s driveshaft (I got it so cheap it was less than replacing the gaitors) and both lower ball joints (copper greased them to f*ck on reassembly). Also new disc and pads front and rear but have still to change the rear links (both metal and plastic ones each side) to hopefully stop the rather unnerving rear steer effect I'm getting occassionally!
Also, does anyone know a decent place to buy a new primer bulb, I'm getting air in the clear fuel lines and I'm fairly certain it's the primer bulb at fault - new fuel filter and seal hasn't cured the problem (not that pressing down on the lid of the fuel filter got rid of the bubbles anyway). Finally getting this car sorted to be a bit of a peach and might end up having a company car soon - feel quite sad about it.
Exhaust 110 fitting 90?
Moderator: Moderators
Re: Exhaust 110 fitting 90?
Hi . As far as ican see,
the 90bhp and 110bhp ( Egzhaust ) shouid fit either,
there both, 2.0s
perhaps what youve noticed is one has a cat and the other dosent,
id just swap the full exhaust over,
the 90bhp and 110bhp ( Egzhaust ) shouid fit either,
there both, 2.0s
perhaps what youve noticed is one has a cat and the other dosent,
id just swap the full exhaust over,
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Exhaust 110 fitting 90?
The back boxes look the same but have different part numbers so I reckon you'll have to suck it and see.
The primer bulb comes with the fuel line and is 16-17 quid
I'm not sure if you can get one from a factor, maybe some sort of universal one but then it'll have joins which will introduce more possibility for air leaks
They're a very common part across Citroen/Pug for cars with the HDi 90 Semen's so possibly second hand?
The primer bulb comes with the fuel line and is 16-17 quid


Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- rwb
- 3.0 24v
- Posts: 2612
- Joined: Thu Jun 17, 2010 7:53 pm
- Location: Yorkshireman exiled in Salop
- Contact:
Re: Exhaust 110 fitting 90?
Are you seeing bubbles in the clear plastic tubes that go to/from the fuel filter?
Apparently this is normal.
Or are there more serious symptoms?
Apparently this is normal.
Or are there more serious symptoms?
Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
Re: Exhaust 110 fitting 90?
my 2.1 has had bubbles in the line for the past 5 years ive had itrwb wrote:Are you seeing bubbles in the clear plastic tubes that go to/from the fuel filter?
Apparently this is normal.
Or are there more serious symptoms?