Hey.
I was searching for a replacement fob for my Y reg 110 GTX.
And listings were of either one or two button fobs.
Since i dont have a fob and only the key blade, i dont have a clue if my car came with 2 or 1 button fob.
Can someone please tell me which one is it?
Thanks!
01' 406 Key Fob.
Moderator: Moderators
01' 406 Key Fob.
110 GTX. I only bought it cause GTX sounds cool. Should've bought a clean LS. :/
Re: 01' 406 Key Fob.
post your vin and i'll look on servicebox, see if it gives any clue's
2004 Iron Grey 407se 136bhp......Written Off
2006 Moonstone blue 407 se 136 bhp.....Written off
2006 silver 407 SW..........replacement
Re: 01' 406 Key Fob.
Do let me know if you come accross any other info, like some codes etc if any, as well.
Thanks.
Thanks.
Last edited by ArLee on Fri Apr 20, 2012 7:42 pm, edited 1 time in total.
110 GTX. I only bought it cause GTX sounds cool. Should've bought a clean LS. :/
Re: 01' 406 Key Fob.
you can delete your vin if you wish 
Some light reading for you and codes can be obtained easily enough if you need them
Deleted info as its only confusing apparently
(Trem, instead of posting a whole load of ballcocks that'll only baffle the poor guy you should use the vin as a filter on the parts diagrams - electrical unit -> protectors and doors -> locking/unlocking)
was only trying to help..........................again i get shot down by a Mod
Some light reading for you and codes can be obtained easily enough if you need them
Deleted info as its only confusing apparently
(Trem, instead of posting a whole load of ballcocks that'll only baffle the poor guy you should use the vin as a filter on the parts diagrams - electrical unit -> protectors and doors -> locking/unlocking)
was only trying to help..........................again i get shot down by a Mod
Last edited by trem1 on Sat Apr 21, 2012 3:24 pm, edited 1 time in total.
2004 Iron Grey 407se 136bhp......Written Off
2006 Moonstone blue 407 se 136 bhp.....Written off
2006 silver 407 SW..........replacement
Re: 01' 406 Key Fob.
Light reading indeed!!
And thanks a lot.
Now lets see if says anything about fob.
Edit: Nope. Nothing about plip.
And thanks a lot.
Now lets see if says anything about fob.
Edit: Nope. Nothing about plip.
110 GTX. I only bought it cause GTX sounds cool. Should've bought a clean LS. :/
Re: 01' 406 Key Fob.
nope only
"SET OF KEYS 1 HF PLIP KEY + 1 SINGLE MAIN KEY"
"SET OF KEYS 1 HF PLIP KEY + 1 SINGLE MAIN KEY"
2004 Iron Grey 407se 136bhp......Written Off
2006 Moonstone blue 407 se 136 bhp.....Written off
2006 silver 407 SW..........replacement
Re: 01' 406 Key Fob.
Does it mean i will be in deep dudu if my car ever decided to activate its immobiliser....???
:'(
:'(
110 GTX. I only bought it cause GTX sounds cool. Should've bought a clean LS. :/
-
rwb
- 3.0 24v
- Posts: 2612
- Joined: Thu Jun 17, 2010 7:53 pm
- Location: Yorkshireman exiled in Salop
- Contact:
Re: 01' 406 Key Fob.
There might be more clues in the handbook.
In the "handbooks" section in ServiceBox there are two versions of each car: a "normal" on, and one with a blob next to it with "dag" appended to the description. What are these?
Unfortunately the earliest handbooks are for 2002. The keys are this type: http://www.ebay.co.uk/itm/PEUGEOT-106-2 ... 5ae512940d
I would expect yours to be this type as well.
You only have one key blade?
I thought that to start the car you must have a fob becuase the fob contains the chip that is read by the immobiliser?
So how do you start the car?
In the "handbooks" section in ServiceBox there are two versions of each car: a "normal" on, and one with a blob next to it with "dag" appended to the description. What are these?
Unfortunately the earliest handbooks are for 2002. The keys are this type: http://www.ebay.co.uk/itm/PEUGEOT-106-2 ... 5ae512940d
I would expect yours to be this type as well.
You only have one key blade?
I thought that to start the car you must have a fob becuase the fob contains the chip that is read by the immobiliser?
So how do you start the car?
Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
Re: 01' 406 Key Fob.
rwb wrote:There might be more clues in the handbook.
In the "handbooks" section in ServiceBox there are two versions of each car: a "normal" on, and one with a blob next to it with "dag" appended to the description. What are these?
Unfortunately the earliest handbooks are for 2002. The keys are this type: http://www.ebay.co.uk/itm/PEUGEOT-106-2 ... 5ae512940d
I would expect yours to be this type as well.
You only have one key blade?
I thought that to start the car you must have a fob becuase the fob contains the chip that is read by the immobiliser?
So how do you start the car?
I have no clue pal.
I only have the key blade in a hollow case (nothing inside). It does start the car. But Im afraid whatever has turned off the immobilizer permanently, might just decide to let it go and I'll be in big big trouble.
110 GTX. I only bought it cause GTX sounds cool. Should've bought a clean LS. :/
-
steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 01' 406 Key Fob.
Edit: DOes your car have a key pad immobiliser then?
Both fobs have the chip.
2002 onwards handbooks cover full mux cars only, by the build code the car in question is a semi-mux D9 (incidentally build code 08936 = Sat 28 Apr 2001 - happy birthday for next Saturday
) and I don't think the pilps are the same, the plip you're after looks like the D8 one but it aint.
I didn't get to see the VIN but I don't think the car has dead locks, so it needs a one button plip (Trem, instead of posting a whole load of ballcocks that'll only baffle the poor guy
you should use the vin as a filter on the parts diagrams - electrical unit -> protectors and doors -> locking/unlocking)
9926KH NFP HF EMITTER
- SIMPLE CENTRAL LOCKING
SEE A
(A is if unavailable use the dumb remote and NFP means they don't make them any more
)
OOh, looking on ebay the difference between the D8 & semi-mux D9 is one of them has a hole in the blade. What does your dumb key have?
A pic:
Both fobs have the chip.
2002 onwards handbooks cover full mux cars only, by the build code the car in question is a semi-mux D9 (incidentally build code 08936 = Sat 28 Apr 2001 - happy birthday for next Saturday
) and I don't think the pilps are the same, the plip you're after looks like the D8 one but it aint.I didn't get to see the VIN but I don't think the car has dead locks, so it needs a one button plip (Trem, instead of posting a whole load of ballcocks that'll only baffle the poor guy
you should use the vin as a filter on the parts diagrams - electrical unit -> protectors and doors -> locking/unlocking)9926KH NFP HF EMITTER
- SIMPLE CENTRAL LOCKING
SEE A
(A is if unavailable use the dumb remote and NFP means they don't make them any more
)OOh, looking on ebay the difference between the D8 & semi-mux D9 is one of them has a hole in the blade. What does your dumb key have?
A pic:
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: 01' 406 Key Fob.
Key pad immobilizer....?!?
No I don't think so.
And yeah i just checked, my key blade does have a hole at the bottom.
And thanks for the birthday wish.
No I don't think so.
And yeah i just checked, my key blade does have a hole at the bottom.
And thanks for the birthday wish.
110 GTX. I only bought it cause GTX sounds cool. Should've bought a clean LS. :/
-
steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 01' 406 Key Fob.
Er no, the other end - I guess that means it hasn't.
Something like this then: http://www.ebay.co.uk/itm/Peugeot-306-4 ... 2c646e51e8
Something like this then: http://www.ebay.co.uk/itm/Peugeot-306-4 ... 2c646e51e8
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: 01' 406 Key Fob.
This is one side of the key case. Dont know what that long thin rectangular thing, besides the opening for the key blade, is.
Edit: i think that thin piece of plastic is THE transponder.
Edit: i think that thin piece of plastic is THE transponder.
Last edited by ArLee on Sat Apr 21, 2012 1:28 pm, edited 1 time in total.
110 GTX. I only bought it cause GTX sounds cool. Should've bought a clean LS. :/
Re: 01' 406 Key Fob.
steve_earwig wrote:Er no, the other end - I guess that means it hasn't.
Something like this then: http://www.ebay.co.uk/itm/Peugeot-306-4 ... 2c646e51e8
Hehehehe.....
I tried hard to find the hole, you know!!
Btw, my key blade is exactly like the one in the ebay link you posted.
So should I go for it??
110 GTX. I only bought it cause GTX sounds cool. Should've bought a clean LS. :/
-
steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 01' 406 Key Fob.
I'm not sure, the ad says it's for a 306 or 406 but searching with the part number in the parts catalogue just brings up 406 restyle so there's a chance it's the wrong one. I couldn't actually find one on there that was definitely the right one either
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.