B.S.I. WHERE IS IT ?

neildavies · Post by **neildavies** » Sun Jan 21, 2007 3:15 pm

No light on the fob. The 206 is one of the first multiplexed cc's

jameslxdt · Post by **jameslxdt** » Sun Jan 21, 2007 3:36 pm

as there is no led on the key, the 206 is full CAN which is why the code reader works on it and not the coupe, the coupe is obd1 and the 206 is obd2 even though there from the same year

neildavies · Post by **neildavies** » Mon Jan 22, 2007 7:26 am

Hi James, Just to add though, the coupe doesn't have a red led on the keyfob either, they're exactly the same keys. Could it still be obd1 though?

Glad to finally speak to someone with knowledge of this, cheers james.

jameslxdt · Post by **jameslxdt** » Mon Jan 22, 2007 6:52 pm

the only way to tell if a 206 is full CAN or not is between the key, on the 406 there's no way to tell, as it was never full CAN, the 406 only got a bsi at the most, which makes all 406's obd1

neildavies · Post by **neildavies** » Mon Jan 22, 2007 7:15 pm

Bugger, makes my ODBII reader a waste of money. At least on my HDi coupe. Will probably be able to see if it works on 406 petrols when we try it on Dairees's some time soon.

jameslxdt · Post by **jameslxdt** » Mon Jan 22, 2007 7:20 pm

i would sincereley doubt it, all 406's petrol or diesel were obd1 unfortunatley

slick · Post by **slick** » Thu Jan 25, 2007 1:37 pm

My uncle had this problem on his 6, I think tis located under sterring wheel somewhere, if that helps!! My uncles mileage readout was f*cked, if it happens to any D9 owners, you have to get the BSI and dash replaced for pug, do it and don't try and do it on the cheap!

axl · Post by **axl** » Fri Jan 26, 2007 11:10 pm

the 206 is not full CAN but CAN-VAN, only the 207,307re,407,607re and the 807re are full can.
The restyled 406 are OBD2 compatible.

axl

jameslxdt · Post by **jameslxdt** » Fri Jan 26, 2007 11:21 pm

say what?
206's up to mid 2002 were semi-can
after that they were full mux/full can
petrol 406's from 2002 onwards are OBD2 and diesel 406's are OBD2 from 2004 onwards

Post by **DaiRees** » Sat Jan 27, 2007 10:19 am

jameslxdt wrote: petrol 406's from 2002 onwards are OBD2 and diesel 406's are OBD2 from 2004 onwards

Hi folks, I'm sitting here with Mr Davies who has kindly brought his code reader down, and the good news is it works on my Jan '02 car

Got 2 codes for you to help me with James but I'll start a new fred!

axl · Post by **axl** » Sat Jan 27, 2007 11:18 pm

jameslxdt wrote:say what?
206's up to mid 2002 were semi-can
after that they were full mux/full can
petrol 406's from 2002 onwards are OBD2 and diesel 406's are OBD2 from 2004 onwards

lil different up to 2002 the 206 was semi-mux after that it was full mux based on CAN for the main systems and VAN for the secondary system. so not full CAN