
Help HDI 90 Refusing to start after C/S Pully change, SORTED
Moderator: Moderators
-
- 1.8 16v
- Posts: 58
- Joined: Tue Jun 03, 2008 10:35 pm
- Location: Droitwich, Worcester
Re: Help HDI 90 Refusing to start after C/S Pully change
Update... still not running. I'm waiting to locate another RF Key Fob before getting someone out with a laptop as I think it's something to do with disconnecting the battery mucking with the immobiliser... no point doing it twice 

-
- 1.8 16v
- Posts: 58
- Joined: Tue Jun 03, 2008 10:35 pm
- Location: Droitwich, Worcester
Re: Help HDI 90 Refusing to start after C/S Pully change
Now got a replacment key fob and called the Auto locksmith (that sortted the wifes car when I f#*ked up the immobliser on it
) will get to me Mon or Tues evening... hopefully he'll get it going fingers crossed 


-
- 1.8 16v
- Posts: 58
- Joined: Tue Jun 03, 2008 10:35 pm
- Location: Droitwich, Worcester
Re: Help HDI 90 Refusing to start after C/S Pully change
Well locksmith was a no show
Had a word with the garage that I use for Mot's and other awkward jobs I can't be ar5ed with, and one of the co-owners came back to the house to have a look at it, did a few basic checks then put his diag on it... showing Injector faults on 1,2,3&4 wtf, guessing at the key programing has gone out off sync or ECU's dead
He's going tow it in on Monday and have a mate with Peugeot software come and have a look... not much else can be done now but pay someone to sort it, it's too good to be scrapped.

Had a word with the garage that I use for Mot's and other awkward jobs I can't be ar5ed with, and one of the co-owners came back to the house to have a look at it, did a few basic checks then put his diag on it... showing Injector faults on 1,2,3&4 wtf, guessing at the key programing has gone out off sync or ECU's dead
He's going tow it in on Monday and have a mate with Peugeot software come and have a look... not much else can be done now but pay someone to sort it, it's too good to be scrapped.
-
- 1.8 16v
- Posts: 58
- Joined: Tue Jun 03, 2008 10:35 pm
- Location: Droitwich, Worcester
Re: Help HDI 90 Refusing to start after C/S Pully change
Well popped into the garage tonight to see what they found... and the ECU is Fu@ked
oh well.
They're going send it off for repair tomorrow... thought about getting a secondhand one but decided I didn't want to take a chance on getting a duffer or killing it like the last one.

They're going send it off for repair tomorrow... thought about getting a secondhand one but decided I didn't want to take a chance on getting a duffer or killing it like the last one.
-
- 1.8 16v
- Posts: 58
- Joined: Tue Jun 03, 2008 10:35 pm
- Location: Droitwich, Worcester
Re: Help HDI 90 Refusing to start after C/S Pully change
Got my Pug back today
had forgot what it was like to drive after a couple of months of driving the wife's Spacestar, not got the bill yet though
gotta call back in on Tuesday for that...


-
- 1.8 16v
- Posts: 58
- Joined: Tue Jun 03, 2008 10:35 pm
- Location: Droitwich, Worcester
Re: Help HDI 90 Refusing to start after C/S Pully change, SO
Well been to garage and settled the bill.... £408
Thats the last time I disconect the battery on a 406... oh well nevermind, a lesson learned


Thats the last time I disconect the battery on a 406... oh well nevermind, a lesson learned

- rwb
- 3.0 24v
- Posts: 2612
- Joined: Thu Jun 17, 2010 7:53 pm
- Location: Yorkshireman exiled in Salop
- Contact:
Re: Help HDI 90 Refusing to start after C/S Pully change, SO
You can buy a whole one for that
Of course, it could well be another that turns out to need a lot of work.
Better the devil you know, so I reckon that was the right -- if painful -- decision.
Hope you get a lot of trouble free miles out of it now


Of course, it could well be another that turns out to need a lot of work.
Better the devil you know, so I reckon that was the right -- if painful -- decision.
Hope you get a lot of trouble free miles out of it now

Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
-
- 1.8 16v
- Posts: 58
- Joined: Tue Jun 03, 2008 10:35 pm
- Location: Droitwich, Worcester
Re: Help HDI 90 Refusing to start after C/S Pully change, SO
Yep bit of an ouch...rwb wrote:You can buy a whole one for that![]()
![]()
Better the devil you know, so I reckon that was the right -- if painful -- decision.

and Sailed Through with no faults, so that was another reason to stick with it. Waiting for the end off the month to tax it now

- rwb
- 3.0 24v
- Posts: 2612
- Joined: Thu Jun 17, 2010 7:53 pm
- Location: Yorkshireman exiled in Salop
- Contact:
Re: Help HDI 90 Refusing to start after C/S Pully change, SO
Exactly. (Same ere actually. I was a bit disappointed because it's a bit of a joke that I always fail on a single bulb.)ScottyDave wrote:Sailed Through with no faults, so that was another reason to stick with it
WhoopeeScottyDave wrote:Waiting for the end off the month to tax it now

Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k