EGR valve

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

User avatar
Ares
3.0 24v
Posts: 673
Joined: Mon Apr 18, 2011 7:36 am
Location: Istra,Croatia

EGR valve

Post by Ares »

Hi mates,just a question.
I was researching the internet but i just couldnt find any pics about the EGR valve.

I do know(well,sort of) its primary task,to take part of the exhaust gas and put it back with the fresh air.
So,it means that this half dirty air is going back in my turbo right?

Secondly,my peugeot is a 1997 2.0 turbo, can i just seal the EGR valve with some metal plate like some people do on older cars?
And for last,i can find any pics of where this damn EGR valve is located,all i can find is some diesel and 407 pugs.,so if anybody here
has some pics of this egr on turbo engine that would be splendid.

I was reading on new cars,egr is,like everything else,connected with ecu,so any work with egr means that ecu will go crazy,but,since my car is 1997
maybe my can be blocked with no errors occuring.

Thanks :)
User avatar
Ares
3.0 24v
Posts: 673
Joined: Mon Apr 18, 2011 7:36 am
Location: Istra,Croatia

Re: EGR valve

Post by Ares »

cmon,im embarrased here now,my girlfrend was laughing how my post has 0 respones hahaha :cheesy:
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: EGR valve

Post by Captain Jack »

Hah.. just Google EGR and you'll get it :)

No idea where it is on the 2.0 petrol turbo but probably at the back of the engine somewhere. I got rid of mine completely (HDI 110), sealing both ends with this.
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
madmadmax
2.0 Turbo
Posts: 484
Joined: Sun Jan 01, 2012 5:49 pm
Location: sheffield, south yourkshire

Re: EGR valve

Post by madmadmax »

first drink a can of pop or beer once finished cut a piece of the can out remove one end of the egr valve make a paper template put template on the flatten piece of can cut and drill in the right place then put piece of can in position to block the egr gases

this is much cheaper and you get to have a bit of dutch courage before you start on it
User avatar
Ares
3.0 24v
Posts: 673
Joined: Mon Apr 18, 2011 7:36 am
Location: Istra,Croatia

Re: EGR valve

Post by Ares »

thanks folks,i think i know how to do seal it but i was having a problem finding the damn thing :cheesy:

also i didnt knew if sealing the egr valve is healthy on this type of engine,older cars yes,but wasnt quite sure for this type.
You think it wouldn be any problem?
cuz it has ecu so i think the ecu would go little bit crazy if i go mess with egr.
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: EGR valve

Post by steve_earwig »

I thought egr valves were a diesel speciality :? Am I going mad?
GAS RECYCLING CIRCUIT DIESEL TURBO XUD9SD
DW10ATED TURBO DIESEL
TURBO DIESEL XUD11BTE AND EEC 95 DEPOLL (ENGINE) SINCE RPO 07742
TURBO DIESEL XUD11BTE AND EEC 95 DEPOLL (ENGINE) UNTIL RPO 07741
TURBO DIESEL XUD9TE AND EEC 95 DEPOLL (ENGINE)
No petrols there :? :?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
jasper5
3.0 24v
Posts: 3689
Joined: Fri Nov 28, 2008 1:30 pm

Re: EGR valve

Post by jasper5 »

Petrol cars are a pain for EGR faults as well, the Vauxhalls especially!
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: EGR valve

Post by steve_earwig »

Ah ignorance - the price I pay for driving bangers most of my life :( Do we know if the TE has one though, 'cos looking at Service Box it appears it doesn't :?

Unless I'm looking in the wrong place of course...
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
jasper5
3.0 24v
Posts: 3689
Joined: Fri Nov 28, 2008 1:30 pm

Re: EGR valve

Post by jasper5 »

Don't know if the 1997 has one, but I found this.......http://www.amazon.co.uk/Peugeot-2-0i-Pe ... B005I4H920
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: EGR valve

Post by steve_earwig »

GAS RECYCLING CIRCUIT DW10ATED TURBO DIESEL AND EEC 2000 DEPOLL (ENGINE)
DW10ATED TURBO DIESEL AND EEC 95 DEPOLL (ENGINE) UNTIL RPO 08792
DW10ATED TURBO DIESEL PARTICLE FILTER SINCE RPO 09821
DW10ATED TURBO DIESEL PARTICLE FILTER UNTIL RPO 09820
EW10D INJECTION
INJECTION EW10J4
INJECTION EW12J4 AND EEC 2000 DEPOLL (ENGINE) SINCE ENGINE 0941439
INJECTION EW12J4 AND EEC 2000 DEPOLL (ENGINE) UNTIL ENGINE 0941438
INJECTION EW7J4
INJECTION XU7JP4 AND EEC 2000 DEPOLL (ENGINE)
TURBO DIESEL DW10TD AND EEC 2000 DEPOLL (ENGINE)
TURBO DIESEL DW10TD AND EEC 95 DEPOLL (ENGINE)

Something to do with EEC2000 regs?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
jasper5
3.0 24v
Posts: 3689
Joined: Fri Nov 28, 2008 1:30 pm

Re: EGR valve

Post by jasper5 »

Could be, sounds logical!
madmadmax
2.0 Turbo
Posts: 484
Joined: Sun Jan 01, 2012 5:49 pm
Location: sheffield, south yourkshire

Re: EGR valve

Post by madmadmax »

no the ecu will compensate and it will be fine i have just blocked the one on the new car up as i hate the things
User avatar
Ares
3.0 24v
Posts: 673
Joined: Mon Apr 18, 2011 7:36 am
Location: Istra,Croatia

Re: EGR valve

Post by Ares »

i belived that every turbo engine has an egr valve.
Just trying to ease the breathing for my 406 on every aspect so i turned attention to egr valve also.
i saw,even on youtube some guys on 406 like mine,turbo 2.0 have sealed the egr valve.
madmadmax
2.0 Turbo
Posts: 484
Joined: Sun Jan 01, 2012 5:49 pm
Location: sheffield, south yourkshire

Re: EGR valve

Post by madmadmax »

ye i am on the same band wagon as i have just got my 406 hdi on the road which i have de egr and air doer it sounds much better and starts nicer too, smoked a bit on first start after taking is all out at once bit it's fine now
User avatar
Ares
3.0 24v
Posts: 673
Joined: Mon Apr 18, 2011 7:36 am
Location: Istra,Croatia

Re: EGR valve

Post by Ares »

yes,the thing that most buzzed me that if i seal EGR valve,the ECU system would get other information than normal and i didnt know how car would react on it.
Post Reply