Replacing dash (D9, fully mux)

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

V6Exec
3.0 24v
Posts: 535
Joined: Mon Apr 23, 2007 11:17 pm
Location: Herts

Re: Replacing dash (D9, fully mux)

Post by V6Exec »

Glad it is all working fine.

Suprised you took the A10 route south rather than staying on the M11.

If you were using your 406 sat nav on the route, you will have had the joys of the "new" A10 bypass between Standon and Ware, where the system just gives up and points generally in the direction you should be heading.
Remember - it only takes a few inches of water to drown a 406 don't make the same mistake I made! The V6 Exec is no more.

406 Coupe S HDi

PP2000 clone interface
User avatar
rwb
3.0 24v
Posts: 2612
Joined: Thu Jun 17, 2010 7:53 pm
Location: Yorkshireman exiled in Salop
Contact:

Re: Replacing dash (D9, fully mux)

Post by rwb »

Just took the A10 to get to that Baldock tunnel road, then A1 down to M25.

Anyway, here's my new toy in action :cheesy:

Image

New air filter (last changed 2010) and fuel filter (last changed 2008) in now (and an oil change) and it feels like a new car!

Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
V6Exec
3.0 24v
Posts: 535
Joined: Mon Apr 23, 2007 11:17 pm
Location: Herts

Re: Replacing dash (D9, fully mux)

Post by V6Exec »

Bet the sat nav enjoyed that road :)
Remember - it only takes a few inches of water to drown a 406 don't make the same mistake I made! The V6 Exec is no more.

406 Coupe S HDi

PP2000 clone interface
User avatar
rwb
3.0 24v
Posts: 2612
Joined: Thu Jun 17, 2010 7:53 pm
Location: Yorkshireman exiled in Salop
Contact:

Re: Replacing dash (D9, fully mux)

Post by rwb »

I think it was OK actually. My CD is 2005 :D

Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
V6Exec
3.0 24v
Posts: 535
Joined: Mon Apr 23, 2007 11:17 pm
Location: Herts

Re: Replacing dash (D9, fully mux)

Post by V6Exec »

So is mine, but it still resorts to vaguely pointing in the direction I should be heading all too often on roads that I am sure were around at the time.

The A10 between Standon and Ware was opened in 2004 (http://en.wikipedia.org/wiki/A10_road_%28England%29)

Weston hills was a couple of years later in 2006 (http://en.wikipedia.org/wiki/Weston_Hills_Tunnel)
Remember - it only takes a few inches of water to drown a 406 don't make the same mistake I made! The V6 Exec is no more.

406 Coupe S HDi

PP2000 clone interface
Post Reply