Remote CL stopped working

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Remote CL stopped working

Post by Captain Jack »

It never rains but it bloody pours. As far as my 406 is concerned anyway...

With my ongoing aux belt tensioner ratle still not resolved, driving home from the in-laws last night I heard some clunking from the steering wheel when turning. There didn't seem to be any particular pattern to it but it got progressively worse in just 15 minutes! So, I disconnected the battery, whipped off the air bag from the steering wheel and tightened the central bolt holding the thing in place - it worked itself loose from the constant vibration it seems!

Anyway, so that got rid of the clunking problem but upon reconnecting the battery, the remote on the key stopped working. Nothing happens when I press either the lock or unlock buttons. The central locking still works when the key is used in the door lock and the car starts fine. This never happened before and I disconnected the battery many times in the past without issues. There is no light on the key to indicate whether it's sending a signal or not but it would be too much of a coincidence if the battery in the key died!

I tried re-syncing it by turning the ignition on, pressing the lock button and pressing it again followed by ignition off but nothing changed. I tried disconnecting the car battery again but this didn't solve anything.

I don't have the PIN code that should have come with the car so I need to get that from somewhere and re-sync using PP2000? And I need to find someone with PP2000....

:evil:
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
adam03031980
2.0 Turbo
Posts: 442
Joined: Wed Nov 08, 2006 8:53 pm
Location: deeping st james

Re: Remote CL stopped working

Post by adam03031980 »

I have a rattle to on mine which only is only apparent at idle the disappears when revs have you had any luck in finding out the problem
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Remote CL stopped working

Post by Captain Jack »

Not yet, Adam. I am waiting for the bottom pulley to arrive today so will swap it over either tonight or tomorrow. Will let you know then...

Does the remote central locking have a fuse?
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
adam03031980
2.0 Turbo
Posts: 442
Joined: Wed Nov 08, 2006 8:53 pm
Location: deeping st james

Re: Remote CL stopped working

Post by adam03031980 »

yeah it does think its fuse 15
stuartkeith
1.8 8v
Posts: 49
Joined: Thu Jan 03, 2013 2:15 pm
Location: Totton Southampton
Contact:

Re: Remote CL stopped working

Post by stuartkeith »

Ive got the same issue, had a problem with central locking not working at all it would trip out. I reset it by disconnecting the battery and now the fob wont work. It dose flash a light when pressed though.

Anyone solved this?
2002 2.0l HDI 90BHP 406 Estate.
adam03031980
2.0 Turbo
Posts: 442
Joined: Wed Nov 08, 2006 8:53 pm
Location: deeping st james

Re: Remote CL stopped working

Post by adam03031980 »

do they just need to be resynched im guessing theyre already coded
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Remote CL stopped working

Post by Captain Jack »

Yeah, no idea what happened. Tried re-syncing it but no joy. Took the fob apart and measured a few points. On button press I get two blips at one second interval on some points, so I am guessing that the key is sending the command to the car but the car is deaf.

All the fuses checked but no blown ones found.

Any idea what else I can do other than get the PIN for the car + PP2000?
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Remote CL stopped working

Post by Captain Jack »

Welp, got the key code and I found a guy with PP2000 20 mins away from me, so will visit him on Saturday and hopefully get this thing working!
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Re: Remote CL stopped working

Post by mjb »

Captain Jack wrote:I tried re-syncing it by turning the ignition on, pressing the lock button and pressing it again followed by ignition off but nothing changed. I tried disconnecting the car battery again but this didn't solve anything.
Thought the procedure was to hold the button? Hate these silly voodoo procedures, but it might be worth double-checking you're doing it right
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Remote CL stopped working

Post by Captain Jack »

mjb wrote:
Captain Jack wrote:Hate these silly voodoo procedures
Tell me about it, mjb. I tried so many procedures; BSI resets, various methods of key re-syncing, patting my head while winding the window down... :roll:
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Remote CL stopped working

Post by Captain Jack »

Sorted it out today with the help of PP2000. This is the only time this has happened to me but it doesn't look like it's a rare thing.
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
Post Reply