Speed cushions have arrived in Welton's town

Just your normal general chatting in here..

Moderator: Moderators

User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Speed cushions have arrived in Welton's town

Post by Welly »

Our local authority have insisted that speeding is a problem in my area (which it flipping well isn't) and we have been blessed with loads of these...........

Image

Now, I go for the 'straddle' monouvre, whilst others go for the 'one wheel up' approach.

They are a bloody nuisance and will not do my poorly engine mounting any good, or my tryes, suspension joints etc.

The stupid thing is (and practicing what my advanced driving cousin told me) that if you take them at 50MPH in 'straddle' mode you can hardly feel a thing :shock: yet go over them at 10 - 20 MPH and the whole car jolts around badly.

Theory has it that a 'properly constructed' DOT speed hump will be barely noticeable taken at 50MPH, I thought I'd try it and it does reduce the impact remarkably. So in effect the new speed cushions have increased my speed :|

I suppose it will give everyone an excuse to buy a stuffing great 4x4 now :x

I'm so annoyed, I've even changed my avatar :oops:

How do you all get on?
Last edited by Welly on Thu Feb 22, 2007 3:53 pm, edited 1 time in total.
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
trem1
3.0 24v
Posts: 1842
Joined: Sat Dec 31, 2005 2:32 pm
Location: south shields,tyneside

Post by trem1 »

i use the straddle technique as well " ooh er missus"
and i also find the faster the better,if you slow down for the speed cushions it does make it worse so they work well dont they :evil: :evil:


2004 Iron Grey 407se 136bhp......Written Off
2006 Moonstone blue 407 se 136 bhp.....Written off
2006 silver 407 SW..........replacement
User avatar
ThePrisoner
2.0 Turbo
Posts: 378
Joined: Wed Jan 17, 2007 11:09 pm
Location: Maidstone, Kent

Post by ThePrisoner »

How funny are these type of speed bumps, and what a waste of public money.

Our Police Skoda Ocatavia vRS is so low to the ground that the sump guard scraps over the bumps as you drive! The soloution? Easy, we now need to accelerate over the bumps to give the sump just that little bit more clearance.

So in actual fact we accelerate over them instead of slowing down.

Another genius idea by the people in charge. :shock:

Pris. :cheesy:
Image

Image
Playtime_Fontayne
2.0 16v
Posts: 191
Joined: Thu Jul 13, 2006 4:42 pm
Location: North East

Post by Playtime_Fontayne »

We have loads round these yurr parts. I can just about manage to straddle them, but someone told me that its better to do the one wheel trick? Something about wear on the inside tyre walls??...but if you straddle it completly that shouldn't happen.

Oi dunno! :?
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Post by mjb »

I generally find my 406 can completely straddle the things if taken dead-on, so they really do very little apart from push you into driving on the opposite side of the road if there's a parked car blocking your straddle on the correct side... Hey I'm not going to risk damaging my suspension! Even smaller cars seem to have no problem straddling as long as they speed up to 40+.

The problem with taking them slow is that your suspension springs will bounce the car horribly, whereas if you race over them the shocks basically just contract then expand rapidly taking the impact away from the chassis the same way (but in reverse) as if you drive over a small pot-hole...
turbolag
Officer of the law!
Posts: 763
Joined: Sun Mar 12, 2006 2:32 pm
Location: 69 Cleo Lane

Post by turbolag »

There's effing loads of the things round here. I go for the 'straddle', and slow right down to walking pace, as the Mi is quite firmly sprung, which gets the impation g1ts behind me in a lather.

Thing is, only careful drivers make any attempt to slow down for them. the ignorant tw4ts that speed all the time, and for whom the humps were fitted, are so thick they just blithely blat across them without pause, so no change there.

And to cap it off, where I live in Richtown, Poshshire, everyone's got an ML, Toerag, XC90 or an X5 (except poor old me!), so the traffic calming measures are even less noticeable than the school children wrapped round their undercarriage.
User avatar
DaiRees
Site Admin
Posts: 5377
Joined: Sat Aug 06, 2005 8:24 am
Location: Merthyr Tydfil, South Wales (God's Country!)

Post by DaiRees »

Yup, loads of 'em round ere too! Not too bad in the 406, unnoticable in the wifes 206, back breaking in my Suzuki! :evil: :shock:
Image
Playtime_Fontayne wrote:"Dai Rees Supplier of Fine Automobilia. Established 2007"
User avatar
STALLED
The moderator down under
Posts: 1175
Joined: Sat Jan 06, 2007 6:26 am
Location: Syd - Aus

Post by STALLED »

There is one I know of like that in Sydney just near the harbour bridge....I just allways position the car so you dont hit em!

The worst are the proper speed humps which are the size of mountains. Was out for a drive with some mates last week and with the 406 loaded up it sits quite low. I would go over one of these humps and the bloody thing would scrape the undercarrage/exhaust on the top of the hump....bloody cringeworthy!!!

Go go 406! :D
1997 406 D8 ST Manual 2.0L!

Image
User avatar
neildavies
3.0 24v
Posts: 1052
Joined: Wed Aug 17, 2005 1:00 pm
Location: South Wales, UK

Post by neildavies »

I normally slow down quite a bit for them in the coupe. My wife's 206cc (go-kart like) you'd feel a pebble-dash stone on the floor.

As for Dai's comment on them, I can vouch that he doesn't seem to notice them and carries on as normal.
2007 Mondeo Titanium X 2.0 TDCi
2007 307cc Sport 2.0 HDi 136
Gone but never forgotten: 2002 406 Coupe SE 2.2 HDi
Image
User avatar
niz406
Admin <BR>Turbo God
Posts: 1752
Joined: Sun Sep 11, 2005 1:07 am
Location: Derbyshire
Contact:

Re: Speed cushions have arrived in Welton's town

Post by niz406 »

Welts,

The 406's wheelbase is usually wide enough to straddle without any contact with the hump at any speed, when the humps are of proper regulation dimensions :D Its intended to make you think you have to slow down... well unless they have the center hump in the middle of the road that is! !
They are a bloody nuisance and will not do my poorly engine mounting any good, or my tryes, suspension joints etc.
TBH, its nothing for the 406's suspension set up, it will eat the humps for breakfast! The stress testing carried out on a cars suspension would bring a tear to your eyes if you saw it being done to your own car! So don't worry as long as you have no naff parts!
Niz406
--------
"Some Say he can fart fire, whilst others say he can urinate rocket fuel.... all we know is he's called... The Niz"
Image
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Post by Welly »

That's the thing Nizzer, some of them I can straddle and others are just that bit wider, I've tried everything but some are bigger than others :|
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
User avatar
DaiRees
Site Admin
Posts: 5377
Joined: Sat Aug 06, 2005 8:24 am
Location: Merthyr Tydfil, South Wales (God's Country!)

Post by DaiRees »

They've widened some of them here because employment of the straddle method resulted in no benefit except for improvement of the driver's aim. Now they're too wide to straddle and too close together to get in between them :cry: .
Image
Playtime_Fontayne wrote:"Dai Rees Supplier of Fine Automobilia. Established 2007"
User avatar
niz406
Admin <BR>Turbo God
Posts: 1752
Joined: Sun Sep 11, 2005 1:07 am
Location: Derbyshire
Contact:

Post by niz406 »

15mm wheel spacers will sort you out! :D

Go on have a bash at it!
Niz406
--------
"Some Say he can fart fire, whilst others say he can urinate rocket fuel.... all we know is he's called... The Niz"
Image
User avatar
Blue406
406 Gimp
Posts: 1147
Joined: Sat Oct 22, 2005 6:08 pm
Location: Fife, Scotland
Contact:

Post by Blue406 »

Up here they've been building them anywhere they fancy.

On corners, on hills, at the foot of folks driveways. There are many hundreds of roads that have none for miles then 5 rows of them within 400 yards.

The worst I've seen is a set of 4 on a steep down hill left hand curve. The grooves dug into them are terrible. They make them out of tarmac up here and there seems to be no real measuring going on and some are a good foot tall!
Image
johnd
1.8 16v
Posts: 76
Joined: Tue Apr 25, 2006 5:12 am
Location: southyorkshire

Post by johnd »

:lol: :lol: You need speed humps like us in South Yorks there are number of streets where the contracters have spaced them too far apart and even the buses can pass through the middle without touching them.
The council have just won a court hearing and the contractors have to dig them all up and start again at a cost to them dont you just know your council tax is being spent well.
Post Reply