Radio Code

puggy · Post by **puggy** » Thu Jun 20, 2013 8:38 am

Mate's got a R reg 406 with coded radio but lost the card with
code on it . Am i right in thinking the code is buried in the
vin number , and if so does anyone know how to work it out ??

GingerMagic · Post by **GingerMagic** » Thu Jun 20, 2013 1:08 pm

Hi mate. Take the last 4 digits of the vin and use the 1234 method.

If last digits are 3651 for example, add a 1 to the 3, 2 to the 6, 3 to the 5, 4 to the 1.

This would be 4885, but as the pug only allows numbers 1 - 6 to be input, you will need to take '6' from any number over 6.

Code would be 4225.

Sounds complicated but really isn't..

Good luck.

( read this on a 306 forum, seems to work....

)

puggy · Post by **puggy** » Thu Jun 20, 2013 1:14 pm

cheers Ginge much obliged

GingerMagic · Post by **GingerMagic** » Sun Jun 23, 2013 8:09 pm

Just remembered, I think its the last 4 digits of the radio's serial number - not the VIN.
How did you get on?

Post by **DaiRees** » Sun Jun 23, 2013 8:14 pm

GingerMagic wrote:Just remembered, I think its the last 4 digits of the radio's serial number - not the VIN.
How did you get on?

Ah that info might come in useful cos I found an old stereo from my D8 in the attic the other day, but have no idea what the code is for it...

puggy · Post by **puggy** » Sun Jun 23, 2013 10:16 pm

Not tried it yet he's been taken into hospital , will let you know soon as .

Post by **Doggy** » Sun Jun 23, 2013 11:53 pm

puggy wrote:Not tried it yet he's been taken into hospital , will let you know soon as .

Keeping my fingers crossed for you, Lou......

Remember:

............Pugfest needs you!............

pacmannewry · Post by **pacmannewry** » Wed Jul 17, 2013 7:07 pm

I tried the 1,2,3,4 method but got no joy and then I found this forum: http://forum.legija.net/forum.php at 9.00 this morning. By lunchtime, they had the correct code for me. You will need the serial no. stamped on the stereo, and few other bits to get an accurate reply. Look for my posts and you'll see what they need.

dirtydirtydiesel · Post by **dirtydirtydiesel** » Wed Jul 31, 2013 11:20 am

Hi guy's
Is this for D8 models only or does it apply to fully muxed D9 models too, As I wasn't aware of any code being needed for my stereo

Cheers Paul.

puggy · Post by **puggy** » Wed Jul 31, 2013 11:36 am

think it's only for d8's my d9 doesn't need one ...

dirtydirtydiesel · Post by **dirtydirtydiesel** » Wed Jul 31, 2013 9:22 pm

puggy wrote:think it's only for d8's my d9 doesn't need one ...

Thanks puggy.

dave406 · Post by **dave406** » Sat Aug 17, 2013 5:49 pm

so d9's dont have radio codes???

GingerMagic · Post by **GingerMagic** » Sat Aug 17, 2013 8:07 pm

No, D9s are coded to the car with PP2000. You can change your stereo with another factory fit unit but will need to get it ' coded ' with PP2000 so the cars ECU will talk to it..!!

dave406 · Post by **dave406** » Sat Aug 17, 2013 10:11 pm

So if I put an after mrket in then wanted to put old back in that would be ok

GingerMagic · Post by **GingerMagic** » Sun Aug 18, 2013 7:22 am

Yes, because the factory one is coded to the car already. There are lots of threads on here regarding aftermarket stereos....

406oc.co.uk

Radio Code

Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code

Re: Radio Code