first play with pp2000

[dave406]

hi all had my first play with pp2000 and now have some questions

first it will not communicate with the engine or gearbox ecu?

now for some pictures of errors that hopefully someone can help with




also another strange thing the car is set as a petrol not a derv???

[rwb]

Don't worry about the intermittent faults -- just clear them and see if they come back.

A chap on the coupé club when plugged into my 406 couldn't read the engine ECU, but not had that problem anywhere else. Confusing.

[Doggy]

hi all had my first play with pp2000 and now have some questions

first it will not communicate with the engine or gearbox ecu?

Try 'talking' to the individual ecu's rather than a global test - often gets round it, for a 110, you need to select engine type RHZ.

also another strange thing the car is set as a petrol not a derv???

It proabably defaults to petrol, if it can't talk to the engine ecu

[dave406]

Hi all i will do that when the weather is better. all the faults above come back even though they have been cleared

[dave406]

any one

[Doggy]

If they keep coming back, you have comms glitch or two, relating to the instrument panel. It's saying it has failed to receive valid data about road speed and engine rpm at some point. If it's happening a lot, you will see the speedo or tacho drop to zero, if not, it's probably not worth bothering about.

Check the connector(s) are properly plugged in, failing that consider another set of clocks, (but note it will display the higher of the two mileages recorded on either set).

[davew]

i get the fault about engine speed and also one about the radio aerial not being connect but everything works fine so i just ignore them.

[dave406]

i get the fault about engine speed and also one about the radio aerial not being connect but everything works fine so i just ignore them.

i figure i will do the same

[FarmerPug]

Ive had the incorrect viechle speed one every time i read the codes yet the speedo always works and is always the same as what tom tom says.

[dave406]

tried going direct and still wont talk to it! tried on mine and captin jack's car

[jasper5]

I had my first play with Lexia today, my mate who does diagnostics couldn't get a Citroen Berlingo diesel started....2003 model, I went out to help him with the Lexia.

Ran through all the diagnostic procedures including Global test....reconfigured the immobiliser and cleared the many fault codes from everywhere....turned the key and off it went

Very happy to have been able to sort it out

[dave406]

Trying to get a refund

[benczuk]

Trying to get a refund

Assume you checked the fuse in the engine bay?

[dave406]

It's only the.engine ecu and auto box or wI'll not talk to

[dave406]

Result got refund and ebay seller told me to keep the product